It has been demonstrated that non-destructive inspection of plates can be performed by using two-dimensional
maps of instantaneous out-of-plane displacements obtained with a self-developed pulsed TV-holography system.
Specifically, the interaction of guided elastic waves with defects produces scattering patterns that contain information
about the defects (position, dimensions, orientation, etc.). For quantitative characterization on this
basis, modeling of the wave propagation and interaction with the defects is necessary. In fact, the development
of models for scattering of waves in plates is yet an active research field in which the most reliable approach
is usually based on the rigorous formulation of elasticity theory. By contrast, in this work the capability of a
simple two-dimensional scalar model for obtaining a quantitative description of the output two-dimensional maps
associated to artificial defects in plates is studied. Some experiments recording the interaction of narrowband
Rayleigh waves with artificial defects in aluminum plates are presented, in which the acoustic field is obtained
from the TV-holography optical phase-change maps by means of a specially developed two-step spatio-temporal
Fourier transform method. For the modeling, harmonic regime and free-stress boundary conditions are assumed.
Comparisons between experimental and simulated maps are included for defects with different shapes.
A novel approach to an established method to calculate the frequency spectrum of Lamb waves is introduced.
Lamb wavetrains are generated with the wedge method in aluminium plates, and a sequence of instantaneous
acoustic out-of-plane displacement fields at the plate surface is measured with a self-developed double-pulsed TV
holography system. This is achieved by emitting two laser pulses synchronized with the piezoelectric transducer
that generates the waves and conveniently delayed. As a result, a 2D optical phase-change map, proportional to
the aforementioned acoustic displacement field, is obtained for the instant of emission of the second laser pulse.
Then, a series of maps is acquired under repeatability conditions by successively delaying the second laser pulse, so
that the resulting sequence of maps records successive instants of the propagation of the wavetrain. The frequency
spectrum of the wavetrain is obtained from a 3D spatio-temporal Fourier transform of the whole sequence of
optical phase-change maps, as the relation between the temporal frequency and the spatial frequency along the
principal propagation direction of the wavetrain. The use of a 3D Fourier transform permits to calculate the
frequency spectrum regardless of the propagation direction of the wavetrain, with non-perfectly plane wavefronts
and also increases the signal to noise ratio with respect to the 2D spatio-temporal Fourier transform approach.
Experiments show that the resulting branches for the Lamb modes existing in the wavetrain are in agreement
with the theoretical frequency spectrum of Lamb waves in aluminium.
The paper describes a hybrid technique, aimed at nondestructive inspection of materials, that combines whole-field optic measurements, acoustic excitation and a numerical reconstruction method. The interior of a thick
specimen is probed by short bursts of narrowband ultrasonic bulk waves. The acoustic wavefronts that constitute
the burst emerge at the opposite face of the sample and induce periodic displacements of its surface. These
displacements are measured by TV holography, a whole-field optical technique, also known as electronic speckle
pattern interferometry (ESPI). The measurement process yields the complex amplitude (i.e., amplitude and
phase) of the acoustic wavefronts at the plane of the surface as a series of 2-D, complex-valued maps. Lastly,
a numerical reconstruction algorithm that uses the Rayleigh-Sommerfeld diffraction formula is employed to
calculate the amplitude and phase of the acoustic wavefronts at any other plane in the interior of the specimen.
This procedure is analogous to the numerical reconstruction of optical object wavefronts in digital holography
(with light and free space taking the place of acoustic waves and the material medium, respectively), so the
present method could also be designated as digital opto-acoustic holography. If the wavefronts are affected by
the presence of inhomogeneities in the medium, information about the shape and position of such defects could
be retrieved from the reconstructed wavefront at the appropriate depth. The technique herein proposed was
successfully tested in an alluminium specimen with an artificial defect.
We describe a novel instrument for the remote measurement of dynamic deflection shapes of structures several
tens of meters long, based on geometrical optics techniques with scanned laser illumination, which we have named
Scanner of Dynamic Deflections (SCADD). A set of aligned control points is measured in each scan, each point
being defined by a retroreflector attached to the structure. By measuring the delay of the optical signal reflected
from each point, the system renders a component of the displacement of that point which is transverse to the
illumination direction.
The intended application of SCADD is the field data acquisition for diagnosing the structural health of
civil infrastructures, either as a stand-alone instrument or integrated in a non-destructive structure testing
system comprising several data sources, typically an array of accelerometers and a SCADD unit. The foreseen
measurement accuracy and the spatial and temporal sampling density of SCADD are adequate to the application
of modal analysis techniques.
For the purpose of locating our proposal in its technological context, we include firstly a brief description of the
most usual methods (optical and non-optical) for the field measurement of vibrations of civil structures. Then,
the SCADD principle of measurement and architecture are detailed. In the experimental section we describe a
SCADD prototype and a series of measurements of a control point located 18 m away from the SCADD head,
from which we extract the repeatability and a calibration curve of the prototype. Finally, the main advantages
of SCADD are detailed.
A new capability of TV holography, also known as electronic speckle pattern interferometry (ESPI), is presented
for locating and imaging slightly thinned or thickened areas in metallic plates. It is based on the measurement
of the wavenumber variation of narrowband Lamb waves as they propagate through these plate-thickness inhomogeneities.
The relation between frequency and phase velocity of all Lamb modes depends on the elastic
constants of the material the plate is made of (two parameters in isotropic materials) and on the plate thickness.
Therefore, the associated dispersion curve of each mode present wavenumber changes that are sensitive
to a thickness reduction. We have formerly developed a double-pulsed TV holography system which allows the
full-field measurement of the instantaneous out-of-plane displacement field induced by surface acoustic waves
and, by further processing, to calculate maps of the acoustic amplitude and phase. A method based on further
analysis of the acoustic complex-displacement map is therefore proposed to locate and characterize such smooth
thickness reductions. In particular, we calculate a map of the local wavenumber of the acoustic wave as the
modulus of the two-dimensional gradient of the mechanical phase. Hence, as the variations in the wavenumber
correspond to variations in the plate thickness, the local thickness reductions and increments can be detected in
this map. Within the resolution limits imposed by the wavelength of the Lamb wave, this method allows also to
contour the shape of the inhomogeneities. The technique is demonstrated herein by imaging a X-shaped recess
machined on an aluminium plate.
In this work we present an application of TV holography to the generation of movies showing the propagation
of acoustic guided waves in aluminium plates. Each movie shows a wavetrain whose envelope (i.e., the acoustic
amplitude) and carrier wave move at the group and phase velocities, respectively. In particular, we use the S0
Lamb mode and the Rayleigh wave to illustrate the behaviour of dispersive and non-dispersive waves. Both
wavetrains were generated by means of the classical wedge method and detected with our double-pulsed TV
holography system, which renders 2D maps of the instantaneous out-of-plane displacement fields of the plate
surface. The snapshots of the movie are obtained from a set of these 2D measurements, taken under repeatability
conditions by successively increasing the delay between generation and detection. Then, a processing based on
the 3D-FFT is applied to the set; the result is a new set of complex maps that permits to characterize the
evolution of the positions of the envelope centre and of a point with a given value of the phase, so that it is
possible to compare the phase and group velocities of the wavetrain.
Ultrasonic Lamb waves provide a useful means for the nondestructive determination of the material elastic constants of shell structures such as plates, pipes, cans and many others. A new optical technique is described for the measurement of the dispersion curves of Lamb wave modes. The experimental system employs the wedge method for the excitation of Lamb modes in aluminum plates of thickness in the range of a few millimetres. Long tone-bursts are used in order to ensure the generation of narrowband ultrasonic waves. Furthermore, an appropriate selection of the wedge angle allows one to generate only the desired individual Lamb mode. The detection of the surface out-of-plane displacements is performed by our self-developed pulsed TV holography system, which evaluates the optical phase by the Spatial Fourier Transform Method. Inasmuch as a whole-field measurement is realized, the wavelength of the excited mode can be precisely measured from the TV holography displacement maps. On the other hand, the wave frequency is measured by a pointwise method, namely a Michelson speckle interferometer. The phase velocity is directly obtained as the product of these two values. Measurements are done for several frequencies and several Lamb modes, thus yielding a collection of experimental points. By fitting these results to the theoretical Rayleigh-Lamb frequency spectrum, values of the shear wave velocity and the Poisson's ratio of the plate material are obtained. For a better accuracy in the measurements, the longitudinal phase velocity was directly determined by the pulse-echo method. The additional knowledge of the mass density allows one to calculate the Young's modulus.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.