HgCdTe APD detector modules telecommunication are developed at CEA/Leti for atmospheric LIDAR and free space optical (FSO). The development is driven by the design and manufacture of generic sub-assemblies that can be adapted in each detector module to meet the specific detector requirements of each application. The optimization of such subassemblies is detailed in perspective of the challenges that are set by the specifications for detector modules currently developed for atmospheric LIDAR, in the scope of an R&T CNES project for Airbus and an H2020 project HOLDON, and FSO, in the scope of an ESA project and in collaboration with Mynaric Lasercom GmbH. Two detector modules have recently been delivered to Airbus DS for extensive LIDAR simulation tests. Initial characterization of these modules shows that the input noise, NEP=10-15fW/√Hz (5 photons rms) have been reduced by a factor three compared to previously developed large area detectors although the bandwidth have been increased to 180 MHz in order to respond to the requirements of high spatial depth resolution. The temporal remanence was 10-4 at 200 ns after the detection of short light impulse, which is compatible with demanding LIDAR applications such as bathymetric profiling.
ECLAIRs, a 2-D coded-mask imaging camera on-board the Sino-French SVOM space mission, will detect and locate gamma-ray bursts in near real time in the 4 - 150 keV energy band in a large field of view. The design of ECLAIRs has been driven by the objective to reach an unprecedented low-energy threshold of 4 keV. The detection plane is an assembly of 6400 Schottky CdTe detectors of size 4x4x1 mm3, biased from -200V to -500V and operated at -20°C. The low-energy threshold is achieved thanks to an innovative hybrid module composed of a thick film ceramic holding 32 CdTe detectors ("Detectors Ceramics"), associated to an HTCC ceramic housing a low-noise 32-channel ASIC ("ASIC Ceramics"). We manage the coupling between Detectors Ceramics and ASIC Ceramics in order to achieve the best performance and ensure the uniformity of the detection plane.
In this paper, we describe the complete hybrid XRDPIX, of which 50 flight models have been manufactured by the SAGEM company. Afterwards, we show test results obtained on Detectors Ceramics, on ASIC Ceramics and on the modules once assembled. Then, we compare and confront detectors leakage currents and ASIC ENC with the energy threshold values and FWHM measured on XRDPIX modules at the temperature of -20°C by using a calibrated radioactive source of 241Am. Finally, we study the homogeneity of the spectral properties of the 32-detector hybrid matrices and we conclude on general performance of more than 1000 detection channels which may reach the lowenergy threshold of 4 keV required for the future ECLAIRs space camera.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.