Building on the successful launch and operation of the Imaging X-ray Polarimetry Explorer (IXPE) mission,1 the Italian National Institute for Nuclear Physics (INFN) has initiated an R&D program to develop the next generation of Gas Pixel Detectors (GPDs) for X-ray polarimetry.2 To support this effort, a Bake and Fill System (BFS) was designed, integrated, and tested. The complex BFS architecture consists of various subsystems, including gas distribution and purification, thermal control, vacuum generation, leak detection and residual gas analysis (RGA), high voltage supply, scientific data acquisition, and x-ray generation (both with passive and active sources). We also implemented remote monitoring and logging of the system status and relevant environmental data. The BFS facility was successfully used to test the detector’s sub-components, fill the GPDs with several gas mixtures at different fill pressures, and conduct functional and performance acceptance tests of the detectors even before their final sealing. The BFS’s successful implementation has demonstrated its potential to support extensive qualification campaigns of detector components, besides being a reliable production facility for flight, sealed GPDs for future space missions in X-ray polarimetry. The development and utilization of the BFS represent an important step towards the production of cutting-edge X-ray polarimeters, which have a wide range of applications in astronomy and astrophysics.
XPOL-III is a recently developed 180 nm CMOS VLSI ASIC integrating more than 100K pixels at 50um pitch in a total active area of 15 X 15 mm2 . Each channel directly samples the charge collected at its own anode and holds it for readout through the built-in, low noise spectroscopic electronics chain. A global control circuit allows for the reconstruction of the spatial distribution of the event charge and the suppression from the readout stream of those pixels below a programmable signal threshold. XPOL-III inherits from previous generations of this ASIC, and extends its predecessor’s performances in terms of readout speed and response uniformity, making XPOL-III a suitable option for high resolution, low noise, high data throughput X-ray detectors. Implementing a single photon detection architecture, XPOL-III provides accurate timing, energy and position resolved measurements when coupled to a proper photon to charge converter. We spot the principles of operation of XPOL-III and summarize the preliminary test results when integrated in its original context, the Gas Pixel Detector (GPD), the same detector class currently at the focus of the Imaging X-ray Polarimetry Explorer (IXPE) telescopes.
Launched on 2021 December 9, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer Mission in collaboration with the Italian Space Agency (ASI). The mission will open a new window of investigation—imaging x-ray polarimetry. The observatory features three identical telescopes, each consisting of a mirror module assembly with a polarization-sensitive imaging x-ray detector at the focus. A coilable boom, deployed on orbit, provides the necessary 4-m focal length. The observatory utilizes a three-axis-stabilized spacecraft, which provides services such as power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of x-ray sources, with follow-on observations of selected targets.
Scheduled to launch in late 2021 the Imaging X-ray Polarimetry Explorer (IXPE) is a Small Explorer Mission designed to open up a new window of investigation -- X-ray polarimetry. The IXPE observatory features 3 identical telescope each consisting of a mirror module assembly with a polarization-sensitive imaging x-ray detector at its focus. An extending beam, deployed on orbit provides the necessary 4 m focal length. The payload sits atop a 3-axis stabilized spacecraft which among other things provides power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of x-ray sources, with follow-on observations of selected targets. IXPE is a partnership between NASA and the Italian Space Agency (ASI).
IXPE (Imaging X-ray Polarimetry Explorer) is the next Nasa Small Explorer mission foreseen for the lunch in 2021. It is a partnership with the Italian Space Agency (ASI). IXPE is devoted to X-ray polarimetry in the 2-8 keV energy band. The IXPE telescope comprises three grazing incidence mirror modules coupled to three detector units hosting each one a Gas Pixel Detector (GPD) polarimeter. The GPD exploits the photoelectric effect to measure the linear polarization of the X-ray emission from astrophysical sources. A wide and accurate on ground calibration was carried out on the IXPE detector units at INAF-IAPS in Italy. A dedicated facility was set-up to calibrate the detector units with polarized and unpolarised X-rays at different energies before Instrument integration.
IXPE, the Imaging X-ray Polarimetry Explorer, is a NASA SMEX mission with an important contribution of ASI that will be launched with a Falcon 9 in 2021 and will reopen the window of X-ray polarimetry after more than 40 years. The payload features three identical telescopes each one hosting one light-weight X-ray mirror fabricated by MSFC and one detector unit with its in-orbit calibration system and the Gas Pixel Detector sensitive to imaging X-ray polarization fabricated by INAF/IAPS, INFN and OHB Italy. The focal length after boom deployment from ATK-Orbital is 4 m, while the spacecraft is being fabricated by Ball Aerospace. The sensitivity will be better than 5.5% in 300 ks for a 1E-11 erg/s/cm2 (half mCrab) in the energy band of 2-8 keV allowing for sensitive polarimetry of extended and point-like X-ray sources. The focal plane instrument is completed, calibrated and it is going to be delivered at MSFC. We will present the status of the mission at about one year from the launch.
The Imaging X-ray Polarimetry Explorer (IXPE) will add polarization to the properties (time, energy, and position) observed in x-ray astronomy. A NASA Astrophysics Small Explorer (SMEX) in partnership with the Italian Space Agency (ASI), IXPE will measure the 2–8-keV polarization of a few dozen sources during the first 2 years following its 2021 launch. The IXPE Observatory includes three identical x-ray telescopes, each comprising a 4-m-focal-length (grazingincidence) mirror module assembly (MMA) and a polarization-sensitive (imaging) detector unit (DU), separated by a deployable optical bench. The Observatory’s Spacecraft provides typical subsystems (mechanical, structural, thermal, power, electrical, telecommunications, etc.), an attitude determination and control subsystem for 3-axis stabilized pointing, and a command and data handling subsystem communicating with the science instrument and the Spacecraft subsystems.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.