Highly ordered nanocrystal (NC) assemblies, namely superlattices (SLs), have been investigated as a building block of novel bright (quantum) light sources because of their unique collective emission process, so-called superfluorescence. Thus far, the primary preparation method for perovskite NC SLs has been drying-mediated self-assembly, in which the NCs spontaneously assemble into SLs while the solvent evaporates. However, this method does not give control over the position and size of assemblies. Hence, it has been challenging to place NC assemblies in photonic device structures. Here, we demonstrate template-assisted self-assembly of CsPbBr3 NCs to achieve precise control of the geometrical features of NC assemblies. A solution of NCs is drop-casted on a substrate with hollow, lithographically-defined template structures made from SiO2. We allow slow solvent evaporation and remove excess NCs from the substrate surface afterward. Thus, NCs only remain in the templates, and the position and size of these NC assemblies can be controlled by changing the design of the hollow structures. We performed time-resolved photoluminescence measurements on these NC assemblies and observed signatures of collective photon emission. Our results provide an important step forward for the development of optical devices that harness embedded perovskite NC assemblies.
All-inorganic lead-halide perovskite (CsPbX3, X = Cl, Br, I) quantum dots (QDs) have emerged as a competitive platform for various optoelectronic applications e.g., LEDs featuring narrow emission and quantum light sources. Many-body interactions and quantum correlations among photogenerated exciton complexes play an essential role, e.g., by determining the laser threshold, the overall brightness of LEDs, and the single-photon purity in quantum light sources. In this work, by combining single-QD optical spectroscopy performed at cryogenic temperatures in combination with configuration interaction (CI) calculations, we address the trion and biexciton binding energies and unveil their peculiar size dependence. We find that trion binding energies increase from 7 meV to 17 meV for QD sizes decreasing from 30 nm to 9 nm, while the biexciton binding energies increase from 15 meV to 30 meV, respectively. CI calculations quantitatively corroborate the experimental results and suggest that the effective dielectric constant for biexcitons slightly deviates from the one of the single excitons, potentially as a result of coupling to the lattice in the multiexciton regime. Our findings provide a deep insight into the multiexciton properties in all-inorganic lead-halide perovskite QDs, essential for classical and quantum optoelectronic devices.
Hot carrier cooling in halide perovskites is governed by the interplay of carrier-carrier and carrier-phonon interactions, and so the study of their dynamics can reveal important underlying photophysical processes operating in these materials. Here, ultrafast pump-push-probe spectroscopy is used to isolate hot carrier dynamics in lead halide perovskite nanomaterials spanning a range of sizes and shapes. A weak size-dependence is shown by cuboidal CsPbBr3 nanocrystals, while 2D CsPbBr3 nanoplatelets and Ruddlesden-Popper (PEA)2PbI4 display a hot phonon bottleneck that becomes increasingly suppressed with greater excitonic character. This is attributed to an enhanced influence of carrier-carrier scattering in low-dimensional perovskites.
An ensemble of emitters can behave differently from its individual constituents when it interacts coherently via common vacuum light modes. One example of a many-body collective coupling is so-called superfluorescent coupling, where the excited emitters are initially fully uncorrelated and coherence is established through spontaneously triggered correlations from quantum fluctuations. Subsequently, the coupled emitters emit a strong superfluorescent pulse. Since this phenomenon requires low inhomogeneity and a fine balance of interactions between the resonant emitters and their decoupling from the environment, superfluorescence has only been observed in a limited number of systems, such as certain atomic and molecular gases and a few solid-state systems.
Here, we investigate densely packed arrays of fully inorganic cesium lead halide perovskite quantum dots[1], known as superlattices. These quantum dots obtain exceptional optical properties such as an lowest bright triplet state with an ultrafast radiative decay that is 1000x faster compared to other conventional nanocrystals at cryogenic temperatures[2]. The resulting high oscillator strength and a long exciton dephasing time[3] are key ingredients for strong light-matter interactions. In a solvent-drying-induced assembly process, perovskite quantum dots form densely packed cuboidal superlattices that show key signatures of superfluorescence[4]. We observe a more than twenty-fold accelerated radiative decay with dynamically red-shifted emission, extension of the first-order coherence time by more than a factor of four, photon bunching and an intensity-dependent time delay after which the photon burst is emitted. Also, at high excitation density, the superfluorescent decay exhibits a Burnham-Chiao ringing behavior, reflecting the coherent Rabi-type interaction.
Lead-halide perovskites are currently the highest-performing solution-processable semiconductors for solar energy conversion, with record efficiencies rapidly approaching that of the Shockley-Queisser limit for single-junction solar cells. Further progress in the development of lead-halide perovskite solar cells must overcome this limit, which largely stems from the ultrafast relaxation of high-energy hot carriers above the bandedge. In this contribution, we use a highly-specialized pump-push-probe technique to unravel the key parameters which control hot carrier cooling in bulk and nanocrystal (NC) lead bromide perovskites with different material composition, NC diameter and surface treatment. All samples exhibit slower cooling for higher hot carrier densities, which we assign to a phonon bottleneck mechanism. By comparing this density-dependent cooling behavior in the different samples, we find that the weak quantum confinement of electronic states and the surface defects in the NCs play no observable role in the hot carrier relaxation. Meanwhile, in accordance with our previous observations for bulk perovskites, we show that the cation plays a critical role towards carrier cooling in the perovskite NCs, as evidenced by the faster overall cooling in the hybrid FAPbBr3 NCs with respect to the all-inorganic CsPbBr3 NCs. These observations highlight the crucial role of the cations toward the phononic properties of lead-halide perovskites, and further point towards the defect tolerance of these emerging solution-processed semiconductors.
Colloidal nanocrystal layers deposited onto the enclosure of InGaN light emitting diodes are demonstrated to operate as
nano-phosphors for color conversion with high color stability. Dependent on the choice of the nanocrystal materials,
either CdSe/ZnS or PbS nanocrystals are applied, the diode emission at 470 nm is converted to the red or to infrared
light, with similar quantum efficiencies. The color conversion is further improved by dielectric mirrors with high
reflectivity at the emission band of the nanocrystals, resulting in an almost doubling of the nanocrystal light extraction from the devices, which increases the nanocrystal device efficiency up to 19.1%.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.