Dr. Mar Alvarez Profile

Dr. Mar Alvarez

at IMM-CNM-CSIC

SPIE Involvement:

Author

Publications (3)

This will count as one of your downloads.

You will have access to both the presentation and article (if available).

DOWNLOAD NOW

This content is available for download via your institution's subscription. To access this item, please sign in to your personal account.

Email or Username Forgot your username?

Password Forgot your password?

Show

Keep me signed in

No SPIE account? Create an account

Proceedings Article | 1 June 2015 Paper

Simulation and characterization of hollow microbridge resonators for label-free biosensing

S. Marquez, M. Alvarez, D. Fariña, C. Dominguez, L. Lechuga

Proceedings Volume 9518, 95180U (2015) https://doi.org/10.1117/12.2178981

KEYWORDS: Resonators, Microfluidics, Biosensors, Chemical elements, Biosensing, Biological research, Finite element methods, Computer aided design, Multiplexing, Device simulation

Read Abstract +

In this work we describe the use of a micro-scale array of polysilicon doubly clamped beams, based on the approach of embedding microfluidic channels inside the resonators, as an innovative platform for multiplexed biosensors. Finite element methods in COMSOL were employed to simulate the structural mechanical behavior and to know the conditions to determine the frequency response in order to achieve optimal sensitivities and quality factors. Particularly, we studied the effect of microchannel cross-section area, length and sidewall thickness respect to the microchannel dimensions with the objective of injecting solutions of different densities. By integrating additional multiphysics models we analyzed the governing microfluidics, and we estimated that a maximum pressure difference of 7 MPa along the microchannels is required to establish an optimum water flow rate of 0.1 μl/min, which is adequate for biosensor applications. To validate the simulations we compared the thermal noise response of a fabricated array of microbridges in air, and we obtained resonant frequencies between 700 KHz and 1 MHz, in good agreement with our simulated results but with downward frequency shifts due to the undercut effect after fabrication.

Proceedings Article | 29 April 2003 Paper

Nanomechanics for specific biological detection

Mar Alvarez, Laura Carrascosa, Javier Tamayo, Ana Calle, Laura Lechuga

Proceedings Volume 5118, (2003) https://doi.org/10.1117/12.498629

KEYWORDS: Gold, Biosensors, Molecules, Adsorption, Sensors, Monoclonal antibodies, Molecular interactions, Silicon, Chemical species, Liquids

Read Abstract +

Nanomechanical biosensors have emerged as a promising platform for specific biological. Among the advantages are direct detection without need of labelling with fluorescent or radioactive molecules, very high sensitivity, reduced sensor area, and suitability for integration using silicon technology. Here we have studied the immobilization of oligonucleotide monolayers by monitoring the microcantilever bending. Oligonucleotides were derivatized with thiol molecules for self-assembly on the gold-coated side of a microcantilever. The geometry of the binding and the surface density were studied by mixing derivatized oligonucleotides with spacer self-assembled monolayers and by controlling the oligonucleotide functional group form. These results are compared with fluoresencent and chemiluminescence techniques. Furthermore, we present the first results of direct pesticide detection with microcantilever-based biosensors. Herbicide DDT was detected by performing competitive assays, in which the cantilever was coated with a synthetic DDT hapten, and it was exposured to different rations between the monoclonal antibody and the DDT. A new technique is presented for the detection of the nanomechanical response for biosensing applications, in which the resonant frequency is measured with about two orders of magnitude higher sensitivity. The low quality factor of the microcantilever in liquid is increased up by using an active feedback control, in which the cantilever oscillation is amplified and delayed and it is used as a driving force. The technique has been applied for the detection of ethanol, proteins, and pathogens.

Proceedings Article | 18 April 2003 Paper

Integrated optical silicon IC compatible nanodevices for biosensing applications

Laura Lechuga, Borja Sepulveda, Andreu Llobera, Ana Calle, Carlos Dominguez

Proceedings Volume 5119, (2003) https://doi.org/10.1117/12.497470

KEYWORDS: Sensors, Waveguides, Refractive index, Silicon, Interferometers, Receptors, Biosensing, Integrated optics, Interferometry, Nanostructures

Read Abstract +

Biological and chemical sensing is one of the application fields where integrated optical nanodevices can play an important role [1]. We present a Silicon Integrated Mach-Zehnder Interferometer Nanodevice using a Total Internal Refraction waveguide configuration. The induced changes due to a biomolecular interactions in the effective refractive index of the waveguide,is monitored by the measurement of the change in the properties of the propagating light. For using this device as a biosensor, the waveguides of the structure must verify two conditions: work in the monomode regime and to have a Surface Sensivity as high as possible in the sensing arm. The MZI device structure is: (i) a Si wafer with a 500 mm thickness (ii) a 2 mm thick thermal Silicon-Oxide layer with a refractive index of 1.46 (iii) a LPCVD Silicon Nitride layer of 100 nm thickness and a refractive index of 2.00, which is used as the guiding layer. To achieve monomode behavior is needed to define a rib structure, with a depth of only 3 nm, on the Silicon Nitride layer by a lithographic step. This rib structure is performed by RIE and is the most critical step in the microfabrication of the device. Over the structure a protective layer of LPCVD SiO₂ is deposited, with a 2 mm thickness and a refractive index of 1.46, which is patterned (photolithography) and etched (RIE) to define the sensing arm. The high sensivity of these devices makes them quite suitable for biosensing applications. For that, without loosing their activity the receptors biomolecules are covanlently immobilized, at nanometer scale , on the sensor area surface. Biospecific molecular recognition takes places when the complementary analyte to the receptor is flowed over the receptor using a flow system. Several biosensing applications have been performed with this device as enviromental pollutant control, immunosensing or genetic detection.

My Library

You currently do not have any folders to save your paper to! Create a new folder below.

Folder Name

Folder Description

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks. You are receiving this notice because your organization may not have SPIE eBooks access.*

*Shibboleth/Open Athens users─please sign in to access your institution's subscriptions.

To obtain this item, you may purchase the complete book in print or electronic format on SPIE.org.

ORGANIZATIONAL
Sign in with credentials provided by your organization.

Organizational Username

Organizational Password

Show/Hide Password

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members:

Non-members: ADD TO CART

Keywords/Phrases

Search In:

Publication Years