This will count as one of your downloads.
You will have access to both the presentation and article (if available).
The research we present is done in the post-RST technology maturation roadmap frame. The Habitable Worlds Observatory requirements are so drastic that the performance of the stressed mirror polishing process needs to be improved to gain surface roughness.
Therefore, synthesizing nanoparticle slurries seems to be an alternative to aiming for a low roughness value. In this paper, we present the nanoparticle production process, the results obtained on the mirror prototypes we produced, and the roadmap for the production of hyperpolished OAPs.
The direct imaging of exoplanets using coronagraphic instruments provides a good example of an astronomical application that can greatly benefit from such developments. Exoplanets imaging is very demanding in terms of optical surface quality, however, the majority of coronagraphic instruments use off axis optics, which manufacturing of such optics could present some drawbacks: either the optics are cut out of a parent large mirror, resulting in a material loss, or the surfaces are machined with sub-aperture tools, resulting in high spatial frequency ripples which must be avoided for this application.
Thanks to 3D printing and topology optimisation we created an innovative warping harness design which can generate any off axis parabola shapes with only one actuator. We optimised the harness thickness distribution in order to reach non symmetrical deformation composed of astigmatism and coma. The warping is applied by micrometric screws and the high transmission factor of the system allows to keep stable the final error budget despite the error introduced by the warping harness fabricated by 3D printing. Several warping harness designs and materials were explored for the prototyping phase. This study is part of WFIRST satellite which will be launch in 2024 by NASA to observe galaxies via a wide field instrument and also perform exoplanet direct imaging via coronagraph. In the case of the WFIRST coronagraphic instrument, eight off axis parabolas are used to relay the beam from one pupil to another. We present the first prototyping results dedicated to the WFIRST off axis parabolas. Deformation surface results are performed by interferometric measurements and compared to Finite Element Analysis predictions.
We describe here the first concave curved CMOS detector developed within a collaboration between CNRS-LAM and CEA-LETI. This fully-functional detector 20Mpix (CMOSIS CMV20000) has been curved down to a radius of Rc =150mm over a size of 24x32mm2. We present here the methodology adopted for its characterization and describe in detail all the results obtained. We also discuss the main components of noise, such as the readout noise, the fixed pattern noise and the dark current. Finally we provide a comparison with the at version of the same sensor in order to establish the impact of the curving process on the main characteristics of the sensor.
An active optics system is principally composed of a deformable mirror, a wave front sensor, a set of actuators deforming the mirror and control/command electronics. It is used to correct the wave-front errors due to the optical design, the manufacturing imperfections, the large lightweight primary mirrors’ deflection in field gravity, the fixation devices, and the mirrors and structures’ thermal distortions due to the local turbulence [4]. Active optics is based on the elasticity theory [5]; forces and/or load are used to deform a mirror. Like in adaptive optics, actuators can simply be placed under the optical surface [1,2], but other configurations have also been studied: a system’s simplification, inducing a minimization of the number of actuators can be achieved by working on the mirror design [5]. For instance, in the so called Vase form Multimode Deformable Mirror [6], forces are applied on an external ring clamped on the pupil. With this method, there is no local effect due to the application of forces on the mirror’s back face. Furthermore, the number of actuators needed to warp the mirror does not depend on the pupil size; it is a fully scalable configuration.
The insertion of a Vase form Multimode Deformable Mirror on the design of an optical instrument will allow correcting the most common low spatial frequency aberrations. This concept could be applied in a space telescope. A Finite Element Analysis of the developed model has been conducted in order to characterize the system’s behavior and to validate the concept.
The RASCASSE project was commissioned by the French spatial agency (CNES) to study the SH and PD sensors for high-performance wavefront sensing. It involved ONERA and Thales Alenia Space (TAS), and LAM. Papers by TAS and LAM on the same project are available in this conference, too [1,2].
The purpose of our work at ONERA was to explore what the best performance both wavefront sensors can achieve in a space optics context. So we first performed a theoretical study in order to identify the main sources of errors and quantify them — then we validated those results experimentally.
The outline of this paper follows this approach: we first discuss phase diversity theoretical results, then Shack-Hartmann’s, then experimental results — to finally conclude on each sensor’s performance, and compare their weak and strong points.
In this paper we present preliminary studies to obtain compact focal plane arrays (FPA) for earth observations on low earth orbits at high angular resolution. Based on the principle of image slicers, we present an optical concept to arrange a 1D FPA into a 2D FPA, allowing the use of 2D detector matrices. This solution is particularly attractive for IR imaging requiring a cryostat, which volume could be considerably reduced as well as the relay optics complexity.
Enabling the use of 2D matrices for such an application offers new possibilities. Recent developments on curved FPA allows optimization without concerns on the field curvature. This innovative approach also reduces the complexity of the telescope optical combination, specifically for fast telescopes. This paper will describe the concept and optical design of an F/5 - 1.5m telescope equipped with such a FPA, the performances and the impact on the system with a comparison with an equivalent 1.5m wide field Korsch telescope.
Toric mirrors and active optics: degenerated configuration for spherical monomode deformable mirrors
APE: a breadboard to evaluate new phasing technologies for a future European Giant Optical Telescope
View contact details
No SPIE Account? Create one
