SignificancePrecise laser ablation at the single-cell level is demonstrated on onion epidermal and human neuroblastoma cells for the first time using a 1.95 μm thulium-doped fiber laser (TDFL). The high-precision laser ablation demonstrated paves the way for micro-dissection and surgery in scientific and clinical applications.AimWe aimed to ablate individual target cells with pulsed laser radiation while minimizing damage to neighboring cells and to study the effects of pulse variation on laser ablation outcome.ApproachAn advanced 1.95 μm nanosecond-pulsed TDFL is developed offering a high degree of pulse control and coupled to a microscope to enable simultaneous ablating and monitoring. A reflective microscope objective is used to focus the light onto the sample without chromatic aberrations. Systematic studies of ablation outcomes using different pulse parameters are then performed.ResultsSingle-cell ablation is achieved, with a precision of 31.3±0.1 μm for onion epidermal cells and 20 μm for fixed human neuroblastoma cells, in which the latter demonstrates the ability to target fixed individual cells in a sample of up to 250,000 cells. Careful control of the pulse parameters produced ablation without carbonization and cavitation bubbles.ConclusionsSingle-cell level ablation harnessing a TDFL is clearly demonstrated on onion epidermal cells and human neuroblastoma cells. The TDFL, with an easily accessible range of wavelengths, provides significant opportunities in the field of biology and medicine for stimulation, dissection, and surgical applications.
We present a compact-cavity, picosecond, mid-infrared optical parametric oscillator (OPO) employing a length of hollow-core-fiber (HCF) inside the cavity and operating at 1-MHz repetition rate for high pulse energy. Pumped by an ytterbium-doped fiber laser, the periodically-poled-lithium-niobate-based OPO generates output beam with tunable wavelengths ranging from 1.3 µm to 4.8 µm. The OPO provides 137-ps pulses with maximum energies of 10 µJ for signal output at 1.6 µm and 5 µJ for idler output at 3 µm, respectively. Output power performance with respect to the wavelength tunability and optimization of beam quality for the OPO are numerically and experimentally investigated.
We demonstrate precise cellular laser ablation on SH-SY5Y and onion cells by using an advanced 1.95μm nanosecond-pulsed thulium-doped fibre laser (TDFL). The TDFL offers a high degree of control on pulse parameters, which enables good thermal and mechanical confinement during the laser ablation and results in a high precision of 30μm, with minimal carbonisation or collateral damage to surrounding cells. The realisation of precise cellular ablation from a TDFL will open up new applications in microsurgery for disease treatment, benefitting patients and researchers worldwide.
We report the development of a high-power, fiber-laser-pumped, sub-nanosecond pulsed 260 nm DUV laser and demonstrate its use for bacterial disinfection. The source generates up to 5.8 W of average power at 260 nm (585 ps pulses at a repetition rate of 1.6 MHz, corresponding to a pulse energy of 3.6 μJ and a peak power of 6.9 kW). The results represent the highest DUV output power from an all-fiberized fiber laser pumped frequency conversion source to date. We demonstrate the application of the laser system to bacterial inactivation. A survival rate of less than 1 in 100000 is demonstrated for E. Coli bacteria after exposure to a DUV dose of 7 mJ/cm2.
Realizing compact picosecond Optical Parametric Oscillators (OPOs) capable of generating high-energy mid-IR pulses at MHz repetition rates is a challenge due to the correspondingly long cavity length requirements. Intracavity fiber delay lines can be used to increase the cavity length but the achievable peak powers are then severely constrained by fiber nonlinearity.
Here we report a compact, ytterbium-fiber-laser pumped, periodically poled lithium niobate based OPO that incorporates a 298 m length of hollow-core-fiber as an ultralow nonlinearity intracavity delay line. The OPO is capable of generating 1-MHz, 100-ps mid-IR pulses with an energy of 1.64-μJ and 12.8-kW peak power.
This paper reports a high-average-power mid-infrared source based on an orientation-patterned gallium arsenide (OP-GaAs) optical parametric oscillator (OPO) with wide wavelength tunability. An average power of 4.8 W of signal (3093 nm) and 3.5 W of idler (5598 nm) was achieved at a pump power of 25.5 W. Tuning ranges of 2895 nm-3342 nm (signal) and 4935 nm-6389 nm (idler) were obtained. The idler-resonant OPO offered good beam quality of the mid-infrared idler waves with an M2 of 1.1. High-average-power induced thermal effects for the OP-GaAs OPO were observed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.