Earth is the only known habitable planet and it serves as a testbed to benchmark the observations of temperate and more Earth-like exoplanets. It is required to observe the disk-integrated signatures of Earth for a large range of phase angles, resembling the observations of an exoplanet. In this work, an acousto-optic tunable filter (AOTF)-based experiment is designed to observe the spectro-polarimetric signatures of Earth. The results of spectroscopic and polarimetric laboratory calibration are presented here along with a brief overview of a possible instrument configuration. Based on the results of the spectro-polarimetric calibration, simulations are carried out to optimize the instrument design for the expected signal levels for various observing conditions. The usefulness of an AOTF-based spectro-polarimeter is established from this study, and it is found that, in the present configuration, the instrument can achieve a polarimetric accuracy of <0.3 % for linear polarization for an integration time of 100 ms or larger. The design configuration of the instrument and the planning of conducting such observations from Lunar orbit are discussed.
Solar polarimetry aims at measuring the full set of Stokes vectors (I, Q, U, V) to extract the magnetic field information of the solar atmosphere. During the polarimetric observations, the oblique reflections from the telescope mirrors modify (crosstalk) or even produce polarization (instrumental polarization). For accurate polarimetric measurements of the source, it is important to correctly model and remove the instrumental polarization and crosstalk introduced by the telescope. The Multi-Application Solar Telescope (MAST) at the Udaipur Solar Observatory is a Gregorian-Coude telescope with a 50 cm off-axis parabolic primary mirror. It consists of nine mirrors that rotate as the telescope tracks the object and delivers a constant beam at the observing floor. Here, we present a formalism for an analytical estimation of the telescope's Mueller matrix using a polarization ray tracing algorithm. The model was experimentally verified at 6173 Å using the observations taken from the facility imaging spectro-polarimeter. The observations were split into two sets, during January and May 2018, to verify the model's consistency. The instrumental polarization was found to vary between 1.3% to 5.54%, and 3.5% to 4.3% throughout the observation from 9 AM to 4 PM during summer and winter respectively. The maximum value of the crosstalk (Q to V and U to V) was found to be 29.08% and 39.46% respectively. We obtained a reasonable match between the model and the observations with some offsets. We also discuss the possible reasons for the observed deviations and their effects.
The multislit spectro-polarimeter (MSSP) is a grating-based littrow spectrograph with five slits at the entrance aperture. The polarimeter consists of a nematic liquid crystal variable retarder as the modulator and a Savart plate as an analyzer. It is one of the facility instruments on the Multiapplication Solar Telescope at the Udaipur Solar Observatory, developed to measure the magnetic fields of the Sun in the photosphere and chromosphere. MSSP currently operates only at 630.2 nm (FeI), but will be upgraded to cover CaII at 854.2 nm, HeI at 1083.2 nm, and FeI at 1565.3 nm. The spectrograph has a spectral dispersion of 15.8 mÅ ± 1.2 mÅ at 630.2 nm. The polarimeter has a sensitivity of the order of 10 − 2 and the root mean squared noise in the Stokes spectrum (continuum wavelength points of Stokes Q, U, and V) is 0.015I. To obtain an estimate of the instrument induced polarization, an analytical model is developed to determine the polarization introduced by the telescope. A polarimetric calibration (PolCal) unit is used to calibrate the downstream optical path from the telescope exit pupil up to the detector in MSSP. A residual polarization cross talk of 10% is measured in the data after applying PolCal corrections. The polarimetric data obtained from the engineering run (first-light) are inverted using NICOLE, to extract the magnetic field parameters. The field strength derived from MSSP observations is compared with the data obtained from helioseismic and magnetic imager and is found to lie within ±70 G in the umbral region and ±200 G in the penumbral region.
Stokes V, the circular polarization of light, from the solar corona is weak of the order of 10 − 4 times the intensity (Stokes I). Measuring weak source polarization, for a faint source such as corona, is difficult and requires long integration time. To obtain long uninterrupted measurements, a space-based polarimeter would be preferable over a ground-based observatory. A full-Stokes polarimeter is designed such that the modulation matrix provides high efficiency in measuring the weak Stokes V signal, while minimizing the cross talk from Stokes Q and Stokes U. The prototype polarimeter consists of a single crystal retarder as the modulator and a Wollaston prism as a dual beam analyzer. The modulation is performed by rotating the retarder continuously. An optimum modulation matrix is derived taking into account the systematics and polarization cross talk due to satellite jitter. We present the results of cross talk simulation and the steps taken to obtain the modulation matrix. A polarimeter designed to observe the solar corona at Fe XIII 1074.6-nm emission line is presented. Jitter and drift from a low earth orbit satellite are taken to simulate and experimentally verify the cross talk and polarimetric efficiency of the polarimeter. A plane parallel crystal retarder produces polarized fringes. F-ratio of the beam incident on the retarder is one of the factors that effects the contrast of the polarized fringes. Results from a simulation performed to compare the polarizance produced by the retarder, when placed in a converging beam and a collimated beam of light, is presented.
The Thirty Meter Telescope (TMT) is a proposed future generation telescope which will be located on either Maunakea, Hawaii or La Palma in the Canary islands. A thermal-infrared (TIR) imager and spectrometer (MICHI) combined with an adaptive optics system is being investigated as a possible second-generation instrument for this telescope. MICHI has been designed to also have a polarimetry capability in both imaging and low dispersion spectroscopic modes. Using polarization ray tracing in Zemax, we have estimated the instrumental polarization (IP) and crosstalk introduced at the focus of the near- and mid-infrared imaging system. In our calculations, we find that the IP varies from 1.0-0.54% and 0.54-0.42%, whereas the polarization crosstalk varies between 25-4% and 4-0.7%, in the near and TIR regions respectively at the instrument port of MICHI. These values of IP and crosstalk may cause problems during the high absolute accuracy polarization observations. Here we present the polarization effects for the imaging system of MICHI and it impacts on the polarization observations.
The Thirty Meter Telescope (TMT) is a future generation telescope proposed to be located in Mauna Kea, Hawaii or in La Palma in the Canary Islands. The telescope will have a segmented primary and an inclined tertiary mirror. The segmentation of the primary mirror and the inclination in the tertiary mirror can introduce significant polarization aberrations. Typically, the polarization aberrations, introduced due to the mirror coating and the high incident angles cause small modifications to the Point Spread Function (PSF). Here, we perform the polarization ray tracing for TMT using the optical design software Zemax for different input polarizations for a point source (on-axis). We calculate the diattenuation and retardance aberration maps for all the three mirrors of TMT. The coating induced astigmatism obtained from the retardance of the primary and secondary mirror is found to be of the order of 0.048 radians, whereas, the polarization induced tilt by the retardance of the tertiary mirror is in the order of 0.29 radians. The Jones pupil maps are estimated at two of the instrument ports, Wide Field Optical Spectrograph (WFOS) and Narrow Field Infrared Adaptive Optics System (NFIRAOS).The Amplitude Response Matrix (ARM) estimated at the WFOS port show the presence of ghost PSF's. The magnitude of the ghost PSF components is of the order of 2.5 x 10-5 at 1μm at WFOS port. The ARM and the Point Spread Matrix (PSM) are estimated at the focus of the NFIRAOS instrument. The Stokes PSF is shown for horizontal and vertical polarization as inputs. The Huygen's point spread function obtained from Zemax shows the variations in FWHM for unpolarized and polarized inputs. These estimations would help in the design aspects of a high contrast imaging instrument for the TMT in the future.
An analytical model has been developed to estimate the polarization effects, such as instrumental polarization (IP), crosstalk (CT), and depolarization, due to the optics of the Thirty Meter Telescope. These are estimated for the unvignetted field-of-view and the wavelengths of interest. The model estimates an IP of 1.26% and a CT of 44% at the Nasmyth focus of the telescope at the wavelength of 0.6 μm at field angle zero with the telescope pointing to zenith. Mueller matrices have been estimated for the primary, secondary, and Nasmyth mirrors. It is found that some of the Mueller matrix elements of the primary and secondary mirrors show a fourfold azimuthal antisymmetry, which indicates that the polarization at the Cassegrain focus is negligible. At the inclined Nasmyth mirror, there is no azimuthal antisymmetry in the matrix elements, and this results in nonzero values for IP and CT, which would negatively impact the polarization measurements at the telescope focus. The averaged Mueller matrix is estimated at the Nasmyth focus at different instrument ports and various zenith angles of the telescope. The variation in the Mueller matrix elements for different coatings is also estimated. The impact of this polarization effect on the science case requirements has been discussed. This analysis will help in achieving precise requirements for future instruments with polarimetric capability.
Annapurni Subramaniam, Shyam Tandon, John Hutchings, Swarna Ghosh, Koshy George, V. Girish, P. U. Kamath, S. Kathiravan, Amit Kumar, J. Paul Lancelot, P. K. Mahesh, Rekhesh Mohan, Jayant Murthy, S. Nagabhushana, Ashok Pati, Joe Postma, N. Kameswara Rao, Kasiviswanathan Sankarasubramanian, P. Sreekumar, S. Sriram, Chelliah Stalin, Firoza Sutaria, Yuvraj Harsha Sreedhar, Indrajit Barve, Chayan Mondal, Snehalate Sahu
We present the in-orbit performance and the first results from the ultra-violet Imaging telescope (UVIT) on ASTROSAT. UVIT consists of two identical 38cm coaligned telescopes, one for the FUV channel (130-180nm) and the other for the NUV (200-300nm) and VIS (320-550nm) channels, with a field of view of 28 arcmin. The FUV and the NUV detectors are operated in the high gain photon counting mode whereas the VIS detector is operated in the low gain integration mode. The FUV and NUV channels have filters and gratings, whereas the VIS channel has filters. The ASTROSAT was launched on 28th September 2015. The performance verification of UVIT was carried out after the opening of the UVIT doors on 30th November 2015, till the end of March 2016 within the allotted time of 50 days for calibration. All the on-board systems were found to be working satisfactorily. During the PV phase, the UVIT observed several calibration sources to characterise the instrument and a few objects to demonstrate the capability of the UVIT. The resolution of the UVIT was found to be about 1.4 - 1.7 arcsec in the FUV and NUV. The sensitivity in various filters were calibrated using standard stars (white dwarfs), to estimate the zero-point magnitudes as well as the flux conversion factor. The gratings were also calibrated to estimate their resolution as well as effective area. The sensitivity of the filters were found to be reduced up to 15% with respect to the ground calibrations. The sensitivity variation is monitored on a monthly basis. At the end of the PV phase, the instrument calibration is almost complete and the remaining calibrations will be completed by September 2016. UVIT is all set to roll out science results with its imaging capability with good resolution and large field of view, capability to sample the UV spectral region using different filters and capability to perform variability studies in the UV.
The polarization introduced due to Thirty Meter Telescope (TMT) optics is calculated using an analytical model. Mueller matrices are also generated for each optical element using Zemax, based on which the instrumental polarization due to the entire system at the focal plane is estimated and compared with the analytical model. This study is significant in the estimation of the telescope sensitivity and also has great implications for future instruments.
ASTROSAT is India’s first astronomy satellite that will carry an array of instruments capable of simultaneous observations in a broad range of wavelengths: from the visible, near ultraviolet (NUV), far-UV (FUV), soft X-rays to hard X-rays. There will be five principal scientific payloads aboard the satellite: (i) a Soft X-ray Telescope (SXT), (ii) three Large Area Xenon Proportional Counters (LAXPCs), (iii) a Cadmium-Zinc-Telluride Imager (CZTI), (iv) two Ultra-Violet Imaging Telescopes (UVITs) one for visible and near-UV channels and another for far-UV, and (v) three Scanning Sky Monitors (SSMs). It will also carry a charged particle monitor (CPM). Almost all the instruments have qualified and their flight models are currently in different stages of integration into the satellite structure in ISRO Satellite Centre. ASTROSAT is due to be launched by India’s Polar Satellite Launch Vehicle (PSLV) in the first half of 2015 in a circular 600 km orbit with inclination of ~6 degrees, from Sriharikota launching station on the east coast of India. A brief description of the design, construction, capabilities and scientific objectives of all the main scientific payloads is presented here. A few examples of the simulated observations with ASTROSAT and plans to utilize the satellite nationally and internationally are also presented.
The National Solar Observatory in collaboration with the High-Altitude
Observatory is developing a new solar polarimeter, the Diffraction Limited Spectro-Polarimeter. In conjunction with a new high-order adaptive optics system at the NSO Dunn Solar Telescope, the DLSP design facilitates very high angular resolution observations of solar vector magnetic fields. This project is being carried out in two phases. As a follow-on to the successful completion of the first phase, the ongoing DLSP Phase II implements a high QE CCD camera system, a ferro-electric liquid crystal modulator, and a new opto-mechanical system for polarization calibration. This paper documents in detail the development of the modulator system and its performance, and presents preliminary results from an engineering run carried out in combination with the new NSO high-order AO system.
A diffraction limited spectro-polarimeter is under construction at the National Solar Observatory in collaboration with the High Altitude Observatory. The scientific objective of the project is to measure the magnetic fields on the Sun up to the diffraction limit of the Dunn Solar Telescope. The same instrument would also measure the magnetic field of large sunspots or sunspot groups with reasonable spatial resolution. This requires a flexible image scale which cannot be obtained with the current Advanced Stokes Polarimeter (ASP) without loosing 50% of the light. The new spectro-polarimeter is designed in such a way that the image scale can be changed without loosing much light. It can work either in high-spatial resolution mode (0.09 arcsec per pixel) with a small field of view (FOV: 65 arcsec) or in large FOV mode (163 arcsec) with low-spatial resolution (0.25 arcsec per pixel). The phase-I of this project is to design and build the spectrograph with flexible image scale. Using the existing modulation, calibration optics of the ASP and the ASP control and data acquisition system with ASP-CHILL camera, the spectrograph was tested for its performance. This paper will concentrate on the performance of the spectrograph and will discuss some preliminary results obtained with the test runs.
This experimental investigation is focused on characterizing a class of electro-rheological (ER) fluids and also characterizing a class of smart structures featuring this class of suspensions. These studies involved the imposition of different applied voltages on the ER fluid domain and various concentrations of the suspension particles. Electro-rheological fluids belong to a class of colloidal suspensions whose global characteristics can be controlled by the imposition of an appropriate external electric field upon the fluid domain. Therefore, when these fluids are embedded within a smart beam-like structure, the global properties of the beam, and hence its vibrational response, can also be controlled. In this work, the energy dissipation characteristics of smart cantilever beam specimens were measured. Different ER fluid smart beam specimens with various concentrations were employed in these investigations to provide insight on the relationship between the particle concentration of the suspension with damping ratio of the smart beam and the electric field intensity imposed on the beam. The coupled electrical and mechanical dynamic properties of smart materials featuring hydrous ER fluids were experimentally studied using a Rheometrics RMS 800 mechanical spectrometer to gain insight into their effectiveness in vibration control applications. THe experimental results demonstrate the non-Newtonian rheological behavior of ER fluids, and the ability of this class of smart beams to dissipate energy increases with the increase of particulate concentration and also the applied electric field.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.