Dr. Surendra M. Gupta Profile

Dr. Surendra M. Gupta

Professor at Northeastern Univ

SPIE Involvement:

Author

Publications (63)

Proceedings Article | 9 October 2006 Paper

Dynamic kanban system for disassembly line applied to an industrial voice recognition client unit

Elif Kizilkaya, Surendra Gupta

Proceedings Volume 6385, 638503 (2006) https://doi.org/10.1117/12.687691

KEYWORDS: Manufacturing, Dynamical systems, Speaker recognition, Process modeling, Control systems, Antennas, Performance modeling, Detection and tracking algorithms, Stochastic processes, Logic

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Total quality management (TQM) in a reverse supply chain

Kishore Pochampally, Surendra Gupta

Proceedings Volume 6385, 63850H (2006) https://doi.org/10.1117/12.686859

KEYWORDS: Compound parabolic concentrators, Tolerancing, Manufacturing, Signal processing, Raw materials, Transform theory, Process control, Physical phenomena, Minerals, Air contamination

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Solving a disassembly-to-order system by using genetic algorithm and weighted fuzzy goal programming

Prasit Imtanavanich, Surendra Gupta

Proceedings Volume 6385, 638506 (2006) https://doi.org/10.1117/12.686263

KEYWORDS: Stochastic processes, Computer programming, Fuzzy logic, Genetic algorithms, Nondestructive evaluation, Manufacturing, Chemical elements, Lutetium, Statistical analysis, Mathematical modeling

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Optimal inventory control with consideration for LCA

Kenichi Nakashima, Surendra Gupta

Proceedings Volume 6385, 63850E (2006) https://doi.org/10.1117/12.692461

KEYWORDS: Manufacturing, Control systems, Systems modeling, Technetium, Pollution control, Computing systems

Read Abstract +

Proceedings Article | 9 October 2006 Paper

A six sigma tolerancing approach for the design of an efficient closed-loop supply chain network

Satish Nukala, Surendra Gupta

Proceedings Volume 6385, 63850F (2006) https://doi.org/10.1117/12.685462

KEYWORDS: Tolerancing, Manufacturing, Lead, Manufacturing equipment, Raw materials, Reverse modeling, Inspection, Visibility, Statistical analysis, Consciousness

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Controlling disassembly line with multi-kanban system

Gun Udomsawat, Surendra Gupta

Proceedings Volume 6385, 638505 (2006) https://doi.org/10.1117/12.686176

KEYWORDS: Manufacturing, Control systems, Heart, Performance modeling, Raw materials, Aluminum, Phase modulation, Design for manufacturability, Computer simulations, Chaos

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Optimum disassembly sequencing

A. Lambert, Surendra Gupta

Proceedings Volume 6385, 638507 (2006) https://doi.org/10.1117/12.687688

KEYWORDS: Computer programming, Cell phones, Iterative methods, Binary data, Chemical elements, Mathematical modeling, Manufacturing, Antennas, Explosives, Metals

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Supplier selection in a closed-loop supply chain network: an ANP-goal programming based methodology

Satish Nukala, Surendra Gupta

Proceedings Volume 6385, 63850G (2006) https://doi.org/10.1117/12.686328

KEYWORDS: Computer programming, Data modeling, Network security, Reliability, Manufacturing, Safety, Manufacturing equipment, Mathematics, Stochastic processes, Nomenclature

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Evolutionary computation with linear physical programming for solving a disassembly-to-order system

Prasit Imtanavanich, Surendra Gupta

Proceedings Volume 6385, 638504 (2006) https://doi.org/10.1117/12.686269

KEYWORDS: Stochastic processes, LCDs, Computer programming, Genetic algorithms, Nondestructive evaluation, Dysprosium, Manufacturing, Neodymium, Chemical elements, Computing systems

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Balancing inventory generated from a disassembly line: mathematical approach

Badr Johar, Surendra Gupta

Proceedings Volume 6385, 638502 (2006) https://doi.org/10.1117/12.686072

KEYWORDS: Manufacturing, Astatine, Safety, Space operations, Inspection, Distributed interactive simulations, Systems modeling, Manufacturing equipment

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Computational complexity of a reverse manufacturing line

Seamus McGovern, Surendra Gupta

Proceedings Volume 6385, 638501 (2006) https://doi.org/10.1117/12.686371

KEYWORDS: Computer programming, Binary data, Optimization (mathematics), Algorithms, Picosecond phenomena, Manufacturing, Computational complexity theory, Chemical elements, Computer science, Genetic algorithms

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Strategic and tactical planning of a closed-loop supply chain network under uncertainty

Satish Nukala, Surendra Gupta

Proceedings Volume 6385, 63850J (2006) https://doi.org/10.1117/12.685459

KEYWORDS: Fuzzy logic, Computer programming, Neodymium, Manufacturing, Tolerancing, Lithium, Chromium, Surface plasmons, Optimization (mathematics), Reverse modeling

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Effective marketing of a closed-loop supply chain network: a fuzzy QFD approach

Satish Nukala, Surendra Gupta

Proceedings Volume 6385, 63850K (2006) https://doi.org/10.1117/12.685461

KEYWORDS: Fuzzy logic, Picosecond phenomena, Stereolithography, Manufacturing, Bismuth, Image processing, Data conversion, Manufacturing equipment, Consciousness

Read Abstract +

Proceedings Article | 9 October 2006 Paper

Pricing decisions for product recovery facilities in a multi-criteria setting using genetic algorithms

Srikanth Vadde, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 6385, 63850C (2006) https://doi.org/10.1117/12.686237

KEYWORDS: Genetic algorithms, Manufacturing, Analytical research, LCDs, Compact discs, Diffusion, Lead, Mechanical engineering, Manufacturing equipment, Stochastic processes

Read Abstract +

Proceedings Article | 8 November 2005 Paper

Environmental practices of the auxiliary companies to the Spanish automobile industry

Pilar González-Torre, Beatriz González, Surendra Gupta

Proceedings Volume 5997, 599703 (2005) https://doi.org/10.1117/12.659366

KEYWORDS: Manufacturing, Environmental management, Safety, Product engineering, Pollution control, Education and training, Standards development, Pollution

Read Abstract +

Proceedings Article | 8 November 2005 Paper

Mechanism for coordination between the collector and the dismantler in a reverse supply chain

Kishore Pochampally, Surendra Gupta

Proceedings Volume 5997, 599706 (2005) https://doi.org/10.1117/12.629299

KEYWORDS: Lead, Manufacturing, Glasses, Consciousness, Metals, Raw materials, Televisions, Printing, Cell phones, Nomenclature

Read Abstract +

Proceedings Article | 8 November 2005 Paper

Multi-criteria analysis of potential recovery facilities in a reverse supply chain

Satish Nukala, Surendra Gupta

Proceedings Volume 5997, 59970J (2005) https://doi.org/10.1117/12.631250

KEYWORDS: Fuzzy logic, Silicon, Analytical research, Failure analysis, Manufacturing, Consciousness, Manufacturing equipment, Mathematics, Stereolithography

Read Abstract +

Proceedings Article | 8 November 2005 Paper

Optimal production policy for a remanufacturing system with virtual inventory cost

Kenichi Nakashima, Surendra Gupta

Proceedings Volume 5997, 59970H (2005) https://doi.org/10.1117/12.630803

KEYWORDS: Manufacturing, Stochastic processes, Systems modeling, Control systems

Read Abstract +

Proceedings Article | 8 November 2005 Paper

Pricing end-of-life components

Srikanth Vadde, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 5997, 59970I (2005) https://doi.org/10.1117/12.631021

KEYWORDS: Manufacturing, Manufacturing equipment, Raw materials, Electronics, Televisions, Lead, Floods, Safety, Cell phones, Printing

Read Abstract +

Proceedings Article | 8 November 2005 Paper

Multi-kanban mechanism for appliance disassembly

Gun Udomsawat, Surendra Gupta

Proceedings Volume 5997, 599704 (2005) https://doi.org/10.1117/12.631026

KEYWORDS: Manufacturing, Control systems, Metals, Raw materials, Aluminum, Electronics, Design for manufacturability, Microwave radiation, Copper, Product engineering

Read Abstract +

Proceedings Article | 8 November 2005 Paper

Multi-criteria decision making approach in multiple periods for a disassembly-to-order system under product’s deterioration and stochastic yields

Prasit Imtanavanich, Surendra Gupta

Proceedings Volume 5997, 599702 (2005) https://doi.org/10.1117/12.630752

KEYWORDS: Stochastic processes, Power supplies, Nondestructive evaluation, Computing systems, Digital video discs, Curium, Compound parabolic concentrators, Optical proximity correction, Mathematical modeling, Computer programming

Read Abstract +

Proceedings Article | 8 November 2005 Paper

Impact of different disassembly line balancing algorithms on the performance of dynamic kanban system for disassembly line

Elif Kizilkaya, Surendra Gupta

Proceedings Volume 5997, 59970D (2005) https://doi.org/10.1117/12.631371

KEYWORDS: Dynamical systems, Manufacturing, Control systems, Performance modeling, Logic, Data modeling, Pollution control, Systems modeling, Stochastic processes, Explosives

Read Abstract +

Proceedings Article | 4 November 2005 Paper

The effect of sudden server breakdown on the performance of a disassembly line

Gun Udomsawat, Surendra Gupta

Proceedings Volume 5997, 59970C (2005) https://doi.org/10.1117/12.630866

KEYWORDS: Control systems, Stochastic processes, Manufacturing, Computer simulations, Chaos, Raw materials, Solids

Read Abstract +

Proceedings Article | 4 November 2005 Paper

A fuzzy-AHP based approach for selecting potential recovery facilities in a closed-loop supply chain

Satish Nukala, Surendra Gupta

Proceedings Volume 5997, 599708 (2005) https://doi.org/10.1117/12.631251

KEYWORDS: Fuzzy logic, Manufacturing, Failure analysis, Cooling systems, Environmental management, Consciousness, Manufacturing equipment, Mathematics, Lithium

Read Abstract +

Proceedings Article | 4 November 2005 Paper

Uninformed and probabilistic distributed agent combinatorial searches for the unary NP-complete disassembly line balancing problem

Seamus McGovern, Surendra Gupta

Proceedings Volume 5997, 59970B (2005) https://doi.org/10.1117/12.629121

KEYWORDS: Chemical elements, Picosecond phenomena, Algorithm development, Cell phones, Binary data, Manufacturing, Optimization (mathematics), Algorithms, Computer programming, Genetic algorithms

Read Abstract +

Proceedings Article | 4 November 2005 Paper

A heuristic solution for the disassembly line balancing problem incorporating sequence dependent costs

A. Lambert, Surendra Gupta

Proceedings Volume 5997, 59970A (2005) https://doi.org/10.1117/12.637368

KEYWORDS: Cell phones, Computer programming, Iterative methods, Manufacturing, Antennas, Explosives, Binary data, Metals, LCDs, Visualization

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Multi-criteria decision making for disassembly-to-order system under stochastic yields

Prasit Imtanavanich, Surendra Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.572060

KEYWORDS: Stochastic processes, Nondestructive evaluation, Mathematical modeling, Computer programming, Optical proximity correction, Instrument modeling, Curium, Data modeling, Manufacturing, Statistical modeling

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Multi-kanban mechanism for personal computer disassembly

Gun Udomsawat, Surendra Gupta, Sagar Kamarthi

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.572062

KEYWORDS: Control systems, Manufacturing, Power supplies, Lead, Software development, CRTs, Silver, Gold, Platinum, Copper

Read Abstract +

The use of personal computers (PCs) continues to increase every year. According to a 1999 figure, 50 percent of all US households owned PCs, a figure that continues to rise every year. With continuous development of sophisticated software, PCs are becoming increasingly powerful. In addition, the price of a PC continues to steadily decline. Furthermore, the typical life of a PC in the workplace is approximately two to three years while in the home it is three to five years. As these PCs become obsolete, they are replaced and the old PCs are disposed of. It is estimated that between 14 and 20 million PCs are retired annually in the US. While 20 to 30% of the units may be resold, the others are discarded. These discards represent a significant potential source of lead for the waste stream. In some communities, waste cathode ray tubes (CRTs) represent the second largest source of lead in the waste stream after vehicular lead acid batteries. PCs are, therefore, not suitable for dumping in landfills. Besides, several components of a PC can be reused and then there are other valuable materials that can also be harvested. And with the advent of product stewardship, product recovery is the best solution for manufacturers. Disassembly line is perhaps the most suitable set up for disassembling PCs. However, planning and scheduling of disassembly on a disassembly line is complicated. In this paper, we discuss some of the complications including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We then show how to overcome them by implementing a multi-kanban mechanism in the PC disassembly line setting. The multi-kanban mechanism relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and demonstrate that this mechanism is superior to the traditional push system in terms of controlling the system’s inventory while maintaining a decent customer service level.

Proceedings Article | 8 December 2004 Paper

Remanufacturing control in multistage systems with stochastic recovery rates

Hasan Aksoy, Surendra Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.580418

KEYWORDS: Stochastic processes, Manufacturing, Control systems, Systems modeling, Computer programming, Process control, Distributed interactive simulations, Optimization (mathematics), Analytical research, Lead

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Sensor-embedded computers for better life-cycle management

Srikanth Vadde, Sagar Kamarthi, Surendra Gupta, Ibrahim Zeid

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.579818

KEYWORDS: Computing systems, Sensors, Computer simulations, Manufacturing, Data centers, Data communications, Performance modeling, Reliability, Internet, Diagnostics

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Disassembly sequencing problem: a case study of a cell phone

Surendra Gupta, Evren Erbis, Seamus McGovern

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.577196

KEYWORDS: Cell phones, Algorithm development, Manufacturing, Antennas, MATLAB, Reselling, Mendelevium, Strontium, Computer programming, Metals

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Application of combinatorial approach in packaging material selection

Lerpong Jarupan, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.599992

KEYWORDS: Packaging, Fuzzy logic, Manufacturing, Genetic algorithms, Phase modulation, Genetics, Gallium, Solids, Product engineering, Liquid phase epitaxy

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Beyond sensor-assisted diagnosis of used products

Kishore Pochampally, Srikanth Vadde, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.571543

KEYWORDS: Fuzzy logic, Probability theory, Sensors, Manufacturing, Smart sensors, Safety, Raw materials, Data centers, Environmental sensing

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Selection of collection centers and recovery facilities for designing a reverse supply chain

Kishore Pochampally, Surendra Gupta, Sushil Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.571526

KEYWORDS: Surface plasmons, Chromium, Silicon, Roads, Manufacturing, Consciousness, Matrices, Chemical elements, Distance measurement, Picosecond phenomena

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Combinatorial optimization methods for disassembly line balancing

Seamus McGovern, Surendra Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.570493

KEYWORDS: Chemical elements, Picosecond phenomena, Optimization (mathematics), Algorithm development, Genetic algorithms, Nano opto mechanical systems, Manufacturing, Algorithms, Computer programming, Visibility

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Product take-back: sensors-based approach

Ibrahim Zeid, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.598922

KEYWORDS: Sensors, Manufacturing, Smart sensors, Computing systems, Signal processing, Model-based design, Reliability, Sensor technology, Data processing, Sensor networks

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Modeling and simulation of the disassembly operations and the associated communications network

Goner Argon, Surendra Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.572026

KEYWORDS: Local area networks, CRTs, Telecommunications, Televisions, Databases, Computing systems, Data communications, Systems modeling, Modeling and simulation, Manufacturing

Read Abstract +

Proceedings Article | 8 December 2004 Paper

Modeling operational behavior of a disassembly line

Elif Kizilkaya, Surendra Gupta

Proceedings Volume 5583, (2004) https://doi.org/10.1117/12.580419

KEYWORDS: Manufacturing, Dynamical systems, Logic, Control systems, Systems modeling, Decision support systems, Stochastic processes, Lead, Polymers, Nondestructive evaluation

Read Abstract +

Proceedings Article | 4 March 2004 Paper

Multiscale registration algorithm for alignment of meshes

Srikanth Vadde, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 5263, (2004) https://doi.org/10.1117/12.539994

KEYWORDS: Computer aided design, Reverse modeling, Manufacturing, Clouds, Solid modeling, Matrices, Detection and tracking algorithms, Reverse engineering, Mathematical modeling, Medical imaging

Read Abstract +

Proceedings Article | 4 March 2004 Paper

Modeling smart sensor integrated manufacturing systems

Srikanth Vadde, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 5263, (2004) https://doi.org/10.1117/12.515985

KEYWORDS: Smart sensors, Manufacturing, Systems modeling, Sensors, Sensor networks, Coastal modeling, Diagnostics, Control systems, Telecommunications, Computing systems

Read Abstract +

Proceedings Article | 4 March 2004 Paper

Simulation study on vehicle dispatching strategies for returnable transport packaging

Lerpong Jarupan, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 5263, (2004) https://doi.org/10.1117/12.518434

KEYWORDS: Packaging, Picosecond phenomena, Manufacturing, Inspection, Virtual colonoscopy, Compact discs, Systems modeling, Cadmium, Voltage controlled voltage source, Time metrology

Read Abstract +

Proceedings Article | 27 February 2004 Paper

Use of data envelopment analysis for product recovery

N. Elif Kongar, Surendra Gupta, Seamus McGovern

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516530

KEYWORDS: Chromium, Manufacturing, Electronics, Nondestructive evaluation, Tumor growth modeling, Compact discs, Environmental sensing, Data modeling, Manufacturing equipment, Reselling

Read Abstract +

Proceedings Article | 27 February 2004 Paper

Optimal control of a remanufacturing system with consideration for product life cycle

Kenichi Nakashima, Surendra Gupta

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516760

KEYWORDS: Manufacturing, Control systems, Stochastic processes, Systems modeling, Lead, Computing systems

Read Abstract +

Proceedings Article | 27 February 2004 Paper

2-opt heuristic for the disassembly line balancing problem

Seamus McGovern, Surendra Gupta

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516155

KEYWORDS: Picosecond phenomena, Algorithm development, Nano opto mechanical systems, Polysomnography, Manufacturing, Binary data, Chemical elements, Optimization (mathematics), Reliability, Pollution

Read Abstract +

Proceedings Article | 27 February 2004 Paper

Multikanban model for disassembly line with demand fluctuation

Gun Udomsawat, Surendra Gupta, Yousef Al-Turki

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516202

KEYWORDS: Control systems, Manufacturing, Raw materials, Product engineering, Design for manufacturability, Environmental sensing, Pollution, Computer simulations, Chaos

Read Abstract +

Proceedings Article | 27 February 2004 Paper

Evaluation of production facilities in a closed-loop supply chain: a fuzzy TOPSIS approach

Kishore Pochampally, Surendra Gupta, Sagar Kamarthi

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516172

KEYWORDS: Fuzzy logic, Manufacturing, Consciousness, Silicon, Product engineering, Reverse modeling, Standards development, Chemical elements, Distance measurement, Design for manufacturability

Read Abstract +

Proceedings Article | 27 February 2004 Paper

A fuzzy cost-benefit function to select economical products for processing in a closed-loop supply chain

Kishore Pochampally, Surendra Gupta, Thomas Cullinane

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516189

KEYWORDS: Fuzzy logic, Chromium, Surface plasmons, Data modeling, Manufacturing, Computer programming, Reselling, Raw materials, Monte Carlo methods

Read Abstract +

Proceedings Article | 27 February 2004 Paper

Second-hand market as an alternative in reverse logistics

Kishore Pochampally, Surendra Gupta

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516226

KEYWORDS: Fuzzy logic, Probability theory, Process modeling, Human-machine interfaces, Manufacturing, Computing systems, Computer programming, Fuzzy systems, Reselling, Software

Read Abstract +

Proceedings Article | 27 February 2004 Paper

Identification of potential recovery facilities for designing a reverse supply chain network using physical programming

Kishore Pochampally, Surendra Gupta, Sagar Kamarthi

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516197

KEYWORDS: Computer programming, Reverse modeling, Manufacturing, Electronic components, Nomenclature, Information technology, Detection and tracking algorithms

Read Abstract +

Proceedings Article | 27 February 2004 Paper

Evaluation of trade-offs in costs and environmental impacts for returnable packaging implementation

Lerpong Jarupan, Sagar Kamarthi, Surendra Gupta

Proceedings Volume 5262, (2004) https://doi.org/10.1117/12.516151

KEYWORDS: Packaging, Manufacturing, Computer programming, Solids, Composites, Air contamination, Systems modeling, Water contamination, Environmental sensing, Product engineering

Read Abstract +

Proceedings Article | 11 February 2002 Paper

Adaptive kanban control mechanism for a single-stage hybrid system

Aybek Korugan, Surendra Gupta

Proceedings Volume 4569, (2002) https://doi.org/10.1117/12.455277

KEYWORDS: Control systems, Manufacturing, Adaptive control, Systems modeling, Nanoimprint lithography, 3D modeling, Stochastic processes, Lead, Raw materials, Autoregressive models

Read Abstract +

Proceedings Article | 11 February 2002 Paper

Genetic algorithm for disassembly process planning

Elif Kongar, Surendra Gupta

Proceedings Volume 4569, (2002) https://doi.org/10.1117/12.455264

KEYWORDS: Genetic algorithms, Manufacturing, Nondestructive evaluation, Genetics, Gallium, Analytical research, Chemical elements, Computer programming, Algorithm development, Logic

Read Abstract +

Proceedings Article | 11 February 2002 Paper

Capacity and buffer trade-offs in a remanufacturing system

Hasan Aksoy, Surendra Gupta

Proceedings Volume 4569, (2002) https://doi.org/10.1117/12.455276

KEYWORDS: Manufacturing, Systems modeling, Network security, Lead, Control systems, Environmental sensing, Inspection, Control systems design, Electronics, Statistical analysis

Read Abstract +

Proceedings Article | 11 February 2002 Paper

Computational algorithm to evaluate product disassembly cost index

Ibrahim Zeid, Surendra Gupta

Proceedings Volume 4569, (2002) https://doi.org/10.1117/12.455280

KEYWORDS: Product engineering, Manufacturing, Algorithm development, Reselling, Internet, Databases, Design for manufacturability, Software development, Java, Logic

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Complications in disassembly line balancing

Askiner Gungor, Surendra Gupta, Kishore Pochampally, Sagar Kamarthi

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417274

KEYWORDS: Digital signal processing, Computing systems, Manufacturing, Reliability, Explosives, Binary data, Algorithm development, Americium, Astatine, Picosecond phenomena

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Effect of reusable rate variation on the performance of remanufacturing systems

Hasan Aksoy, Surendra Gupta

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417263

KEYWORDS: Manufacturing, Control systems, Systems modeling, Lead, Cadmium, Network security, Electronics, Stochastic processes, Neodymium, Statistical analysis

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Case-based reasoning disassembly system

Ibrahim Zeid, Surendra Gupta, Li Pan

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417262

KEYWORDS: Assembly equipment, Lamps, Manufacturing, Data modeling, Systems modeling, Feature extraction, CAD systems, Algorithm development, Head, Lithium

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Economic analysis of end-of-life computer systems in educational institutions

Mehmet Dincer, Elif Kizilkaya, Surendra Gupta

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417289

KEYWORDS: Computing systems, Manufacturing, Electronics, Analytical research, Cesium, Tin, Mathematical modeling, Reselling, Control systems, Neon

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Optimizing the supply chain in reverse logistics

Pitipong Veerakamolmal, Surendra Gupta

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417259

KEYWORDS: Manufacturing, Neodymium, Lead, Computing systems, Computer programming, Reverse modeling, Systems modeling, Compact discs, Computer simulations

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Economics of PC recycling

Jane Boon, Jacqueline Isaacs, Surendra Gupta

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417288

KEYWORDS: Electronics, Manufacturing, Metals, Computing systems, Glasses, CRTs, Instrument modeling, Lead, Electronic components, Gold

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Goal programming approach to the remanufacturing supply-chain model

Elif Kongar, Surendra Gupta

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417260

KEYWORDS: Computer programming, Neodymium, Toxic industrial chemicals, Reselling, Manufacturing, Binary data, Tumor growth modeling, Nondestructive evaluation, Mathematical modeling, Silicon

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Disassembly knowledge representation via XML

Ibrahim Zeid, Surendra Gupta

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417261

KEYWORDS: Lamps, Data modeling, Internet, Java, Manufacturing, Databases, Visualization, Systems modeling, Video, Software engineering

Read Abstract +

Proceedings Article | 9 February 2001 Paper

Substitution policies for a hybrid system

Aybek Korugan, Surendra Gupta

Proceedings Volume 4193, (2001) https://doi.org/10.1117/12.417248

KEYWORDS: Switching, Manufacturing, Computer programming, Systems modeling, Stochastic processes, Tin, Control systems, Indium nitride, Raw materials, Francium

Read Abstract +