Cleaning of substrates prior to optical coating is an important step in the manufacturing of high performance optical components. It is well known that the ultra-sonic frequency used during substrate cleaning has a strong influence on the quality of the cleaning process and the number of remaining particles on the surface. Therefore, we have investigated the influence of ultra-sonic frequency during substrate cleaning on the laser resistance of antireflection coatings. For this purpose, a SiO2 / Ta2O5 AR-coating for a normal angle of incidence at 1064 nm was deposited onto fused silica substrates. Prior to deposition, the substrates were cleaned with cleaning processes. The applied ultra-sonic frequencies were 40, 80, 120 and 500 kHz. After deposition the LIDT was measured using a 1064 nm ns-pulsed laser test bench. It turned out that the different ultra-sonic-cleaning processes have a strong influence on the number of remaining particles on the surface of the cleaned samples. The counted number of particles with sizes greater < 83 nm were between 1320 and 12 particles for the different applied ultra-sonic frequencies. In consequence the different cleaned and AR-coated samples show different laser damage behavior. Nevertheless the measured particle density does not totally explain the differences in laser resistance.
Several studies have reported on the detrimental effects of inadequate cleaning on the performance of optical components exposed to laser radiation. The remaining particulates, contaminants or residue located in the coating or on the substrate surface can absorb laser energy and consequently induce damage. To minimize these contaminants, investigations of various cleaning processes have been performed in both the research and industry communities. Transparent published results and comparisons of the different cleaning processes considered, however, are limited due to proprietary considerations. In addition to this, the manufacturing environment, deposition processes, substrate- and deposition materials all have an influence on the effectiveness of a cleaning process. The purpose of this study was to investigate different cleaning procedures and their influence on the laser resistance of ion-beam sputtered antireflective coatings. For this purpose, a SiO2 / Ta2O5 multilayer antireflective coating for a normal angle of incidence at 1064 nm was deposited onto fused silica substrates. Prior to deposition, the substrates were cleaned with a variety of cleaning solutions and procedures and their roughness and surface quality inspected. All samples were characterized in terms of their laser damage threshold using a 1064 nm ns-pulsed test bench and subsequently visually inspected in order to understand the cause of the damage. In this work, the details of the cleaning steps and the corresponding laser damage performance for the different cleaning processes are presented and compared.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.