This will count as one of your downloads.
You will have access to both the presentation and article (if available).
First, we made an experiment to confirm the performance using a DPMZM with a microwave hybrid coupler for applying 10GHz two-tone signals to each electrode of the DPMZM. The chirp parameters of two Mach-Zehnder modulators (MZMs) of the DPMZM were set to opposite signs to each other, +1 and −1. It is seen from the experiment that the intensity ratio of IMD3 to signal in the receiver output was less than −58dB at modulation indices below 0.55 (0.175π) rad and that the minimum of the ratio was less than −80dB at around 0.5 (0.16π) rad. In contrast, for a conventional single-MZM the ratio was less than −27dB below 0.55rad modulation indices. These experimental results agreed well with the calculation ones.
Next, we designed and fabricated the modulator of the single-chip structure and the single-input operation for smallsizing and simple operation. The microwave rat-race circuit (RR), which operates as a 180° hybrid coupler, was designed on a Lithium Niobate (LN) substrate at 10GHz and was integrated with modulation electrodes of the DPMZM. The RR and modulation electrodes were formed with a gold thin film pattern at a time. The IMD3 suppression operation was confirmed for the fabricated modulator as well.
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
View contact details
No SPIE Account? Create one
