Cortical surface stimulators are an application of µLEDs allowing spatiotemporal stimulation of genetically targeted populations of neurons in the cerebral cortex. To address challenges with the spatial resolution and density of stimulation sites, a high-precision 100-pixel µLED device was developed. The device consists of a 10 x 10 matrix addressed array of GaN µLEDs with 200 µm spacing, which emit blue light at 450 nm through a sapphire substrate. In-vivo experiments in the auditory cortex of ChR2-expressing transgenic mice have shown consistent multi-unit activity with low µLED drive current and low lateral spread of activation.
There is current demand for pattern programmable devices that can deliver light to deep brain structures for use in optogenetic experiments. Here we introduce a microLED optrode device with 181 individually addressable sites, each with the capability to optogenetically excite thousands of neurons in vivo. The device consists of a 10 x 10 glass microneedle array directly integrated with a custom fabricated microLED device. 100 microLEDs couple to the needle tips for intra-cortical light delivery and 81 microLEDs sit at interstitial points for surface illumination. Light delivery and thermal properties are comprehensively evaluated.
Optogenetics is a powerful tool for neural control that supports perturbation of specific cell types. The Utah Optrode Array, paired with a µLED array, is an optical stimulation device for precise multi-site light delivery in deep cortical layers. We describe recent developments in the evolution of this device, including methods for improved light coupling and device encapsulation.
We present an electrically addressable optrode array capable of delivering light to 181 sites in the brain, each providing sufficient light to optogenetically excite thousands of neurons in vivo, developed with the aim to allow behavioral studies in large mammals. The device is a glass microneedle array directly integrated with a custom fabricated microLED device, which delivers light to 100 needle tips and 81 interstitial surface sites, giving two-level optogenetic excitation of neurons in vivo. Light delivery and thermal properties are evaluated, with the device capable of peak irradiances >80 mW / mm2 per needle site. The device consists of an array of 181 80 μm × 80 μm2 microLEDs, fabricated on a 150-μm-thick GaN-on-sapphire wafer, coupled to a glass needle array on a 150-μm thick backplane. A pinhole layer is patterned on the sapphire side of the microLED array to reduce stray light. Future designs are explored through optical and thermal modeling and benchmarked against the current device.
Optogenetics is a powerful tool for neural control, but controlled light delivery beyond the superficial structures of the brain remains a challenge. For this, we have developed an optrode array, which can be used for optogenetic stimulation of the deep layers of the cortex. The device consists of a 10×10 array of penetrating optical waveguides, which are predefined using BOROFLOAT® wafer dicing. A wet etch step is then used to achieve the desired final optrode dimensions, followed by heat treatment to smoothen the edges and the surface. The major challenge that we have addressed is delivering light through individual waveguides in a controlled and efficient fashion. Simply coupling the waveguides in the optrode array to a separately-fabricated μLED array leads to low coupling efficiency and significant light scattering in the optrode backplane and crosstalk to adjacent optrodes due to the large mismatch between the μLED and waveguide numerical aperture and the working distance between them. We mitigate stray light by reducing the thickness of the glass backplane and adding a silicon interposer layer with optical vias connecting the μLEDs to the optrodes. The interposer additionally provides mechanical stability required by very thin backplanes, while restricting the unwanted spread of light. Initial testing of light output from the optrodes confirms intensity levels sufficient for optogenetic neural activation. These results pave the way for future work, which will focus on optimization of light coupling and adding recording electrodes to each optrode shank to create a bidirectional optoelectronic interface.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.