Paper
12 January 1977 Bandlimiting Considerations In Geometrical Distortion Systems
F. Paul Carlson, Robert E. Francois Jr.
Author Affiliations +
Abstract
A scheme for realizing certain geometrical distortions in a coherent optical system has been proposed and demonstrated by Bryngdahl. This technique is described as being applicable when the object functions exhibit "relatively slow spatial variations." In this paper the notion of slowly varying object functions is examined in terms of the spatial bandwidth of these functions, thus providing a means for examining the merit of such a distortion technique. It is shown that the technique may be expected to work well at low spatial frequencies, worsening with quadratic spatial frequency dependence. The spatial frequencies at which the distortion technique fails may be readily estimated. In general, these limiting spatial frequencies depend on wavelength, separation between input and output planes, posi-tion in the output or input plane, and the particular distortion one wishes to realize.
© (1977) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. Paul Carlson and Robert E. Francois Jr. "Bandlimiting Considerations In Geometrical Distortion Systems", Proc. SPIE 0083, Optical Information Processing: Real Time Devices & Novel Techniques, (12 January 1977); https://doi.org/10.1117/12.954910
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Distortion

Spatial frequencies

Phase shifts

Optical signal processing

Imaging systems

Ronchi rulings

Optical components

RELATED CONTENT

Canonical images
Proceedings of SPIE (May 14 2019)
Real-time modulation transfer function measurement system
Proceedings of SPIE (March 01 2019)
Halftone moiré due to imager distortion
Proceedings of SPIE (January 18 2010)
Highly sensitive register mark based on moire patterns
Proceedings of SPIE (June 18 1993)

Back to Top