Paper
28 April 1987 Loss-Compensation Of Intensity-Modulating Fiber-Optic Sensors
Glenn Beheim, Donald J Anthan
Author Affiliations +
Proceedings Volume 0718, Fiber Optic and Laser Sensors IV; (1987) https://doi.org/10.1117/12.937525
Event: Cambridge Symposium-Fiber/LASE '86, 1986, Cambridge, MA, United States
Abstract
This report describes a new type of intensity-modulating fiber-optic sensor which has high immunity to the effects of variations in the losses of the fiber-link. A variable-splitting-ratio transducer is used to differentially modulate the intensities of the light which it transmits and reflects. Using a four-fiber optical link, light is impinged onto the transducer from either direction, and, in each case, the transmitted and reflected signals are measured. These four signals are then processed to remove the effects of the fiber and connector losses. Loss-compensated sensors of angular position and displacement are described, and their outputs are shown to be highly stable despite considerable variations in the transmissivities of the fiber-link components.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Glenn Beheim and Donald J Anthan "Loss-Compensation Of Intensity-Modulating Fiber-Optic Sensors", Proc. SPIE 0718, Fiber Optic and Laser Sensors IV, (28 April 1987); https://doi.org/10.1117/12.937525
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Transducers

Connectors

Fiber optics sensors

Signal processing

Light emitting diodes

Signal attenuation

Back to Top