Paper
22 February 2018 Non-planar calibration phantoms for optical coherence tomography
Yang Lu, Neil Gordon, David Robinson, Benjamin Coldrick, Vladimir Mezentsev, Francesco Menduni, Antonio Fratini, Kate Sugden
Author Affiliations +
Abstract
Optical coherence tomography (OCT) is increasingly used in areas such as ophthalmology and contact lens metrology. However, in such cases, image distortion can occur due to the non-planar nature of the measured sample. Postprocessing algorithms can be implemented to correct this distortion. Here we present an OCT phantom designed to confirm the validity of post-processing algorithms used for measuring curved surfaces. A multi-purpose OCT phantom has been created within a fused silica plano-convex lens using the direct femtosecond laser writing technique. This phantom can be used to calibrate and quantitatively assess the performance (e.g. resolution, sensitivity and distortion) of OCT systems and associated post-processing algorithms for curved structures such as lenses. This novel OCT phantom has been characterized using an optical microscope and OCT systems.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yang Lu, Neil Gordon, David Robinson, Benjamin Coldrick, Vladimir Mezentsev, Francesco Menduni, Antonio Fratini, and Kate Sugden "Non-planar calibration phantoms for optical coherence tomography", Proc. SPIE 10544, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XI, 105441B (22 February 2018); https://doi.org/10.1117/12.2290422
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical coherence tomography

Calibration

Distortion

Femtosecond phenomena

Optical calibration

Point spread functions

Silica

Back to Top