Soft capacitive sensors for measurement of both positive and negative pressures

Hongyang Shi; Thassyo Pinto; Yiheng Zhang; Chuan Wang; Xiaobo Tan

doi:10.1117/12.2300748

23 March 2018 Soft capacitive sensors for measurement of both positive and negative pressures

Hongyang Shi, Thassyo Pinto, Yiheng Zhang, Chuan Wang, Xiaobo Tan

Proceedings Volume 10597, Nano-, Bio-, Info-Tech Sensors, and 3D Systems II; 105971E (2018) https://doi.org/10.1117/12.2300748
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2018, Denver, Colorado, United States

Abstract

Soft pressure sensors have a wide range of applications, such as aerodynamic control of cars and unmanned aerial vehicles, navigation of underwater vehicles, and wearable electronics. Existing soft pressure sensors are typically based on capacitive or resistive principles. However, these sensors, made of multiple layers of different materials, tend to delaminate under negative pressures and thus cause sensor failure. In this work, we present the fabrication method for soft capacitive pressure sensors that can reliably detect both positive and negative pressures. The pressure sensor is comprised of one layer of Ecoflex-0030 substrate with cavity channels embedded inside, and two layers of polydimethylsiloxane (PDMS), with two layers of patterned PEDOT:PSS films serving as the electrodes of the sensor. The PEDOT:PSS films are screen printed orthogonally on both sides of the Ecoflex-0030 substrate, and each side is encapsulated by another PDMS layer, which is much stiffer than the Ecoflex-0030 substrate. More importantly, the cavity channels in the Ecoflex-0030 substrate greatly enhance the substrate deformation, hence the capacitive sensor would exhibit remarkable relative change in capacitance when a pressure is applied. Secondly, the encapsulation of PDMS on the Ecoflex substrate protects the electrodes and effectively avoids the delamination problem under negative pressure. In particular, we report the detailed characterization of sensitivity and repeatability of the fabricated pressure sensor for positive and negative pressures of up to 50 kPa. Furthermore, a 12×12 pressure sensor array is fabricated to demonstrate the capability of mapping pressure distributions created by both compressive loads and vacuum suction.

Citation Download Citation

Hongyang Shi, Thassyo Pinto, Yiheng Zhang, Chuan Wang, and Xiaobo Tan "Soft capacitive sensors for measurement of both positive and negative pressures", Proc. SPIE 10597, Nano-, Bio-, Info-Tech Sensors, and 3D Systems II, 105971E (23 March 2018); https://doi.org/10.1117/12.2300748

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available