Presentation + Paper
16 May 2018 Depth and width reproducibility of integral photography from multi-view stereoscopic image
Author Affiliations +
Abstract
Multi-view stereoscopic images were produced via the pick-up method with respect to the object set in the computer, and integral photography was generated from this multi-view stereoscopic image. When the multiview stereoscopic image was taken by pick-up, the optical axis of each camera of the array was aligned with one point in the front of the camera array. A calculation method was derived with respect to the depth position and width of the object displayed by integral photography generated using this method. Based on the derived calculation method, consideration was given to the distortion displayed and reproduced with respect to the depth position and width of the object in the prototyped integral photography.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sumio Yano, Yuta Katayose, Hyoung Lee, and Min-Chul Park "Depth and width reproducibility of integral photography from multi-view stereoscopic image", Proc. SPIE 10666, Three-Dimensional Imaging, Visualization, and Display 2018, 106660G (16 May 2018); https://doi.org/10.1117/12.2304712
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photography

Cameras

LCDs

Distortion

Prototyping

3D modeling

Image fusion

Back to Top