Paper
8 August 1989 In Vitro Atherosclerosis: Correlation Between IV Ultrasonic Imaging And High Resolution MRI
C. R. Meyer, E. H. Chiang, D. M. Williams M.D., A. J. Buda M.D.
Author Affiliations +
Abstract
Previous in vitro ultrasonic imaging in our laboratory with a prototype subassembly suitable for use in an imaging catheter was performed at 20 MHz using a rather large transducer having a 2 mm aperture focussed at 10 mm [1,2,3]. More recently ultrasonic images obtained at 30 MHz with a 1 mm active aperture focussed at 3 mm, have been compared with high resolution magnetic resonance images (MRI). Axial and lateral ultrasonic resolutions have improved from 100 and 450 μm, respectively, to 100 and 150 μm using the newer, smaller transducer. Signal-to-noise ratios as visualized in the resulting images remains unchanged, and penetration of normal vessel walls is complete.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. R. Meyer, E. H. Chiang, D. M. Williams M.D., and A. J. Buda M.D. "In Vitro Atherosclerosis: Correlation Between IV Ultrasonic Imaging And High Resolution MRI", Proc. SPIE 1068, Catheter-Based Sensing and Imaging Technology, (8 August 1989); https://doi.org/10.1117/12.952182
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transducers

Ultrasonics

Ultrasonography

Image resolution

In vitro testing

Magnetic resonance imaging

Blood

Back to Top