Presentation + Paper
3 October 2018 Variable shaped beam lithography capabilities enhancement by "small-shots" correction
A. Fay, A. Girodon, J. Chartoire, J. Hazart, S. Bayle, P. Schiavone
Author Affiliations +
Abstract
Electron beam Mask Writers based on Variable Shaped Beam lithography (VSB) technology write designs with elementary fragments called shots. The electron dose assigned to each shot is usually defined by mean of a classical e-beam Proximity Effects Correction (PEC) model. However, this model reaches its limits in the case of shots of small size, typically below 50 nm due to machine imperfections. We developed a new “small-shots” model and a related calibration methodology. After calibration, small-shots corrections have been applied on layouts of different complexity using the INSCALE software from Aselta Nanographics. We experimentally demonstrate a 10-fold decrease of Edge Placement Errors (EPE) on photonics and Inverse Lithography Technology structures by using small-shot correction.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Fay, A. Girodon, J. Chartoire, J. Hazart, S. Bayle, and P. Schiavone "Variable shaped beam lithography capabilities enhancement by "small-shots" correction", Proc. SPIE 10810, Photomask Technology 2018, 108101D (3 October 2018); https://doi.org/10.1117/12.2501823
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Lithography

Photomasks

Electron beam lithography

Beam shaping

Data modeling

Photonics

RELATED CONTENT

CLMPC: curvilinear MPC in a mask data preparation flow
Proceedings of SPIE (October 31 2017)
Advanced mask process modeling for 45 nm and 32 nm...
Proceedings of SPIE (March 07 2008)
Resist loss in 3D compact modeling
Proceedings of SPIE (March 13 2012)
SEM-contour based mask modeling
Proceedings of SPIE (March 07 2008)

Back to Top