Measurement and use of the refractive index distribution in optical elements created by additive manufacturing

M. Rank; A. Heinrich

doi:10.1117/12.2507262

4 March 2019 Measurement and use of the refractive index distribution in optical elements created by additive manufacturing

M. Rank, A. Heinrich

Author Affiliations +

Proceedings Volume 10930, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XII; 109300Z (2019) https://doi.org/10.1117/12.2507262
Event: SPIE OPTO, 2019, San Francisco, California, United States

Abstract

Additive manufacturing of optical elements out of polymer allow new design concepts for optics. The parts are built up layer by layer. Unlike polymer binding with glass particles with its sintering process no secondary step is necessary for polymer printing to create the final part. With more and more printers and transparent materials available, this technology becomes more and more relevant for prototyping or custom optics. Therefor a deep understanding of the optical effects in the part is desirable. Key property of optical elements is the refractive index. The materials for polymer printing are most commonly resins that cure under UV-exposure and show lower refractive indices in liquid phase than cured. Assuming a dependency of the refractive index on the grade of polymerization and therefor the UV-exposure, the layering process of additive manufacturing causes variations of the refractive index within the part. Using the Scanning Focused Refractive Index Microscopy, the distribution of the refractive index within and between the layers is analyzed. The analysis includes comparisons between raw parts after printing and parts after UV post curing. Additionally, layer free samples from a Continuous Liquid Interface Printing System are examined for the homogeneity of the refractive index distribution. The purpose of the presentation is to give a detailed insight into the optical effects occurring at the layer interfaces of elements created by additive manufacturing. Possible use cases of the refractive index distributions within the part are also discussed.

Conference Presentation

Citation Download Citation

M. Rank and A. Heinrich "Measurement and use of the refractive index distribution in optical elements created by additive manufacturing", Proc. SPIE 10930, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XII, 109300Z (4 March 2019); https://doi.org/10.1117/12.2507262

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available