Paper
15 November 2018 High-gain amplification of weak signal based on stimulated Brillouin scattering in optical fiber
Author Affiliations +
Proceedings Volume 10964, Tenth International Conference on Information Optics and Photonics; 109642C (2018) https://doi.org/10.1117/12.2505758
Event: Tenth International Conference on Information Optics and Photonics (CIOP 2018), 2018, Beijing, China
Abstract
Lidar has been widely used in both military and civil applications. Its received optical signal undergoes considerable loss and disturbance from background noise, which limits its performance especially in bad weather or air conditions. A high-gain and frequency-selective amplifier for weak optical signal based on stimulated Brillouin scattering in single mode fiber is proposed, which is an excellent candidate for the signal enhancement in lidar system. The characteristics of the amplifier were studied numerically and experimentally. In experiment, a 430-nW (peak power) pulsed signal was amplified by 70 dB with a signal-noise ratio of 14 dB, which was in good agreement with theoretical result.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liwen Sheng, Dexin Ba, and Zhiwei Lu "High-gain amplification of weak signal based on stimulated Brillouin scattering in optical fiber", Proc. SPIE 10964, Tenth International Conference on Information Optics and Photonics, 109642C (15 November 2018); https://doi.org/10.1117/12.2505758
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal to noise ratio

Optical amplifiers

Scattering

Fiber amplifiers

LIDAR

Optical fibers

Fiber Bragg gratings

Back to Top