Presentation + Paper
9 October 2019 Progress overview of EUV resists status towards high-NA EUV lithography
Author Affiliations +
Abstract
We investigated how the processing parameters, including post exposure baking (PEB), and resist film thickness (FT) influence the dose and line width roughness (LWR) of different types of EUV resists, targeted for the high-NA EUV lithography. We compared the dose and LWR of molecular, inorganic and CAR resists at half-pitch (HP) of 16 and 14 nm for different PEB temperatures. The results show that without PEB or at lower PEB temperature, resists require higher doses, as expected. We also observed the different behavior of various resist platforms in response to variation of the film thickness. The results showed that there is a room for the optimization of the processing parameters to improve dose and LWR of molecular, inorganic and CAR resists for line/space printing at high resolution.
Conference Presentation
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaolong Wang, Li-Ting Tseng, Iacopo Mochi, Michaela Vockenhuber, Lidia van Lent-Protasova, Rolf Custers, Gijsbert Rispens, Rik Hoefnagels, and Yasin Ekinci "Progress overview of EUV resists status towards high-NA EUV lithography", Proc. SPIE 11147, International Conference on Extreme Ultraviolet Lithography 2019, 1114711 (9 October 2019); https://doi.org/10.1117/12.2536923
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line width roughness

Extreme ultraviolet lithography

Extreme ultraviolet

Diffraction gratings

Scanning electron microscopy

Photomasks

Printing

Back to Top