Operation of a novel, dual function thin slab ultrafast amplifier at 1030nm, 515nm, and 343nm

Jason R. Lee; Rolf B. Birch; Benjamin Fulford; David Birkin

doi:10.1117/12.2544278

21 February 2020 Operation of a novel, dual function thin slab ultrafast amplifier at 1030nm, 515nm, and 343nm

Jason R. Lee, Rolf B. Birch, Benjamin Fulford, David Birkin

Proceedings Volume 11259, Solid State Lasers XXIX: Technology and Devices; 112591H (2020) https://doi.org/10.1117/12.2544278
Event: SPIE LASE, 2020, San Francisco, California, United States

Abstract

Industrial applications increasingly demand femtosecond and picosecond pulse duration laser systems with a range of wavelengths from the near infrared to the ultraviolet. This paper reports a dual function thin slab femtosecond amplifier system operating at a range of wavelengths via frequency conversion. A Yb:YAG thin slab amplifier was demonstrated that incorporates both the pre-amplifier and power amplifier functions in a single crystal. To ensure efficient, homogenous pumping of the thin slab a novel diode bar imaging technique is used. The combination of the homogenous pumping and the unique amplifier architecture enables average output powers < 200 W to be maintained across a range of pulse repetition frequencies from 1 MHz to 40 MHz with a pulse duration of 50 ps at a wavelength of 1030 nm and M² ~ 1.2. The pulse was compressed to a duration of 900 ± 100 fs with a compressor efficiency of < 90 %. A modified LXR100 system which is based on this technology was used as the fundamental 1030 nm source, with output powers up to 130 W, from 1 MHz – 10 MHz and pulse durations in the 900 fs regime. Second harmonic generation of 515 nm was achieved by coupling the beam into a type-1 critically phase matched LBO crystal to enable efficient conversion whilst avoiding damage. Second harmonic generation of 515 nm to < 95 W at a conversion efficiency of ~74 % and pulse energy of < 96 μJ and M² < 1.3 was achieved. Further wavelength conversion was undertaken by coupling the 515 nm and unconverted 1030 nm output into a second LBO crystal for third harmonic generation. Type-1 and type-2 phasematching configurations for third harmonic generation were investigated, with an output power of < 20 W and pulse energy of < 20 μJ achieved at 343 nm with a conversion efficiency with respect to incident 1030 nm of < 21 % for both configurations.

Citation Download Citation

Jason R. Lee, Rolf B. Birch, Benjamin Fulford, and David Birkin "Operation of a novel, dual function thin slab ultrafast amplifier at 1030nm, 515nm, and 343nm", Proc. SPIE 11259, Solid State Lasers XXIX: Technology and Devices, 112591H (21 February 2020); https://doi.org/10.1117/12.2544278

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
9 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Crystals

Amplifiers

Harmonic generation

Ultrafast phenomena

Second-harmonic generation

Diodes

Laser crystals

Show All Keywords

Keywords/Phrases

Search In:

Publication Years