Paper
18 December 2019 Fiber Bragg grating process embedded in carbon fiber reinforced composites
Meiling Shi, Chaojun Xin, Huaipeng Wang, Chen Yang, Hong Yao
Author Affiliations +
Proceedings Volume 11340, AOPC 2019: Optical Fiber Sensors and Communication; 113401K (2019) https://doi.org/10.1117/12.2547994
Event: Applied Optics and Photonics China (AOPC2019), 2019, Beijing, China
Abstract
In this process, the processing flow of fiber Bragg grating (FBG) embedded carbon fiber reinforced composites are prepared by means of pressurized film forming and end-surface elicitation. Firstly, the development of composites in aerospace field is introduced. Then, according to the principle of FBG sensor, a scheme for embedding fiber grating into carbon fiber composites is designed. There are three key steps involved in this process, namely, laying the bare fiber parallel to the carbon fiber cleavage direction, applying the end-surface elicitation method with the use of stainless steel thin tubes and Teflon fine tubes for protection, and pasting the rubber strip tile on the end to prevent the curing of the fiber break. After processing, a 260x60x3mm surface intact product is made according to the design scheme. There is no deformation in Carbon fiber surface and the end-surface is intact.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Meiling Shi, Chaojun Xin, Huaipeng Wang, Chen Yang, and Hong Yao "Fiber Bragg grating process embedded in carbon fiber reinforced composites", Proc. SPIE 11340, AOPC 2019: Optical Fiber Sensors and Communication, 113401K (18 December 2019); https://doi.org/10.1117/12.2547994
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Fiber Bragg gratings

Sensors

Optical fibers

Temperature metrology

Aerospace engineering

Cladding

Back to Top