Design and prototyping of beam shapers to generate circular or square top-hat beams of different size for additive manufacturing applications

Gebirie Y. Belay; Michael Vervaeke; Sijie Liao; Piet Van den Ecker; Tom Craeghs; Hugo Thienpont; Jürgen Van Erps

doi:10.1117/12.2555010

13 April 2020 Design and prototyping of beam shapers to generate circular or square top-hat beams of different size for additive manufacturing applications

Gebirie Y. Belay, Michael Vervaeke, Sijie Liao, Piet Van den Ecker, Tom Craeghs, Hugo Thienpont, Jürgen Van Erps

Author Affiliations +

Proceedings Volume 11349, 3D Printed Optics and Additive Photonic Manufacturing II; 113490M (2020) https://doi.org/10.1117/12.2555010
Event: SPIE Photonics Europe, 2020, Online Only

Abstract

Many industrial and research applications benefit from laser beam profiles which are non-Gaussian but rather tailored to that specific application. For example, shaping the beam profile and footprint holds great potential for beam delivery in laser-assisted manufacturing processes. In particular, top hat beam profiles of different shapes and size would enable speeding up additive manufacturing while increasing the resolution of the 3D printed parts. In this paper, we present the design of different beam shapers for high power CO₂ lasers used in laser sintering, which are able to generate respectively square and circular top hat beam profiles. The size of the spot is controlled by using additional lenses to reduce or enlarge the beam size as necessary after the beam shaping optics. A spot size of 0.5 mm or 5 mm diameter can be achieved by switching between different lenses and adjust the distances accordingly. The designed beam shaping optics were subsequently fabricated in-house using ultra-precision diamond tooling in zinc sulfide material which is tolerant to high laser power and transparent at a wavelength of 10.6 μm. This beam shaping optics can form the basis for dynamic beam shaping in which the spot size, spot shape and/or intensity profile can be actively controlled by moving the optical components in the laser beam path.

Citation Download Citation

Gebirie Y. Belay, Michael Vervaeke, Sijie Liao, Piet Van den Ecker, Tom Craeghs, Hugo Thienpont, and Jürgen Van Erps "Design and prototyping of beam shapers to generate circular or square top-hat beams of different size for additive manufacturing applications", Proc. SPIE 11349, 3D Printed Optics and Additive Photonic Manufacturing II, 113490M (13 April 2020); https://doi.org/10.1117/12.2555010

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available