Presentation + Paper
5 March 2021 Pump combiner with chirally coupled core fibers for side pumped single frequency all fiber amplifiers
Author Affiliations +
Abstract
We present the development of an all-fiber side-fused signal-pump-combiner based on an integrated 3C R feedthrough fiber. This specialty fiber uses a 34 μm single-mode core and shows great potential to enable further output power scaling while maintaining high beam quality. The side-fusing technique has the advantage of an uninterrupted signal core and can be used in co- and counter-pumped fiber lasers and amplifiers. The signal-pump-combiner was operated up to an input power of 600W from four pump fibers and coupling efficiencies of 79% were achieved. The component was additionally investigated by computer tomography imaging, which revealed that the cladding structure of this specialty fiber prevented the required level of glass fusion of the 3C R fiber with the pump fibers. The investigation will help to further increase the pump coupling efficiency of the signal-pump-combiners. This represents the first step of developing all-fiber and high power capable laser systems based on the 3C R fiber.
Conference Presentation
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eike Brockmüller, Sven Hochheim, Peter Wessels, Joona Koponen, Tyson Lowder, Steffen Novotny, Jörg Neumann, and Dietmar Kracht "Pump combiner with chirally coupled core fibers for side pumped single frequency all fiber amplifiers", Proc. SPIE 11667, Components and Packaging for Laser Systems VII, 116670J (5 March 2021); https://doi.org/10.1117/12.2583079
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber amplifiers

Amplifiers

Cladding

Fusion splicing

Optical pumping

Single mode fibers

RELATED CONTENT

High-power single-mode trench-assisted EDFA
Proceedings of SPIE (June 15 2015)
Multi-element fiber for space-division multiplexing
Proceedings of SPIE (February 01 2014)
Distributed Gires-Tournois etalon-based gain equalizer
Proceedings of SPIE (October 14 2010)
Erbium-doped fiber design for improved splicing performance
Proceedings of SPIE (January 10 2005)
Kilowatt-power Er3+ doped cladding fiber amplifier
Proceedings of SPIE (August 12 2008)

Back to Top