Paper
9 November 1989 On Vibration-Design Aspects Of An IR - Scanning Earth Sensor
R. K. Gupta, T. M. Muraleedharan, G. Anandachandran, A. S. Laxmi Prasad
Author Affiliations +
Abstract
The paper discusses the design considerations made on a 'scanning earth sensor' in order to avoid the possible failure of the system due to resonance induced by the vibrations generated during the launch and by the vibrations existing on the spacecraft structure. The most severely affected part of the sensor is its scan mechanism. The scan mechanism consists of a scan mirror and an angle encoder which are fixed on a torsional flexture. The oscillating frequency of the mechanism is made use of, in the necessary attitude determination and control process of the satellite. The transverse frequencies of the flexture are brought to a safe range by adjusting the tension on the flexture which in turn, eliminates the encoder-reference errors. An experimental set up is established in which a reflective sensor is used to measure this frequency which yields the tension on the flexture. This methodology for measurement of frequency and tension is successfully realized and the sensor is qualified in the necessary vibration test requirements of the mission.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. K. Gupta, T. M. Muraleedharan, G. Anandachandran, and A. S. Laxmi Prasad "On Vibration-Design Aspects Of An IR - Scanning Earth Sensor", Proc. SPIE 1167, Precision Engineering and Optomechanics, (9 November 1989); https://doi.org/10.1117/12.962950
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Infrared sensors

Reflectors

Space operations

Reflectivity

Satellites

Computer programming

RELATED CONTENT


Back to Top