Presentation + Paper
4 March 2022 High-power single-frequency fiber laser based on cascaded fiber structure
Chaodu Shi, Shijie Fu, Xun Deng, Hao Tian, Shuai Sun, Junxiang Zhang, Wei Shi, Jianquan Yao
Author Affiliations +
Abstract
In this paper, we report a high-power single-frequency all-fiber amplifier at 1064 nm based on cascaded hybrid active fibers. The cascaded gain fiber design, where a piece of active fiber with lower dopant concentration is spliced before the highly doped gain fiber, is proposed to effectively alleviate the thermal loads of high-power amplifier. By virtue of hybrid pump at 976 nm and 915 nm to increase the threshold of transverse mode instability (TMI) effect, an output power of 435 W is achieved from the Yb3+-doped fiber with large core diameter of 30 μm. The beam quality is well maintained with a M2 of 1.4 even at the maximum laser power.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chaodu Shi, Shijie Fu, Xun Deng, Hao Tian, Shuai Sun, Junxiang Zhang, Wei Shi, and Jianquan Yao "High-power single-frequency fiber laser based on cascaded fiber structure", Proc. SPIE 11981, Fiber Lasers XIX: Technology and Systems, 119810M (4 March 2022); https://doi.org/10.1117/12.2609154
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Fiber lasers

Fiber amplifiers

Optical amplifiers

Ytterbium

Absorption

Cladding

Back to Top