Paper
1 August 1990 Use of optical fibers in the pulsed time-of-flight laser rangefinding technique
Author Affiliations +
Proceedings Volume 1267, Fiber Optic Sensors IV; (1990) https://doi.org/10.1117/12.20291
Event: The International Congress on Optical Science and Engineering, 1990, The Hague, Netherlands
Abstract
The problems associated with the fibres used in pulsed time-of-flight rangefinders were studied, and particularly errors due to the transit time disturbances of step and graded index fibres as a function of fibre length, input numerical aperture and temperature. The cladding modes and leaky modes ofa fibre can affect the transit time oflight pulses under suitable conditions, so that fibres become sensitive to environmental effects. The effect of temperature is smaller and more linear for acryl-coated fibres than for nylon-coated ones. The main reason for the non-linear effect of temperature on a nylon fibre is the non-linear Young's modulus of nylon as a function of temperature. The increasing transit time of hard clad silica (HCS) fibres at lower temperatures (below +20°C), contrary to glass fibres, can be explained by the different thermal coefficient of the core and cladding, leading to increased non-homogenities on the core-cladding interface.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seppo M. Nissilae, Juha Tapio Kostamovaara, and Risto A. Myllylae "Use of optical fibers in the pulsed time-of-flight laser rangefinding technique", Proc. SPIE 1267, Fiber Optic Sensors IV, (1 August 1990); https://doi.org/10.1117/12.20291
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Optical fibers

Cladding

Glasses

Silica

Fiber optics sensors

Time metrology

Back to Top