Paper
10 August 2023 Research on trajectory planning method of the collaborative manipulator
Lide Zhao, Qian Xiao, Hao Chen, Qian Li
Author Affiliations +
Proceedings Volume 12748, 5th International Conference on Information Science, Electrical, and Automation Engineering (ISEAE 2023); 127484M (2023) https://doi.org/10.1117/12.2689399
Event: 5th International Conference on Information Science, Electrical and Automation Engineering (ISEAE 2023), 2023, Wuhan, China
Abstract
To make the operation trajectory of the collaborative manipulator smoother and solve the problems of turning point displacement and velocity abrupt change, the 5-3-5 joint interpolation method is used to transition the operation trajectory. First, establishing a robotic arm simulation model used an improved D-H parameter method in the MATLAB Robotics toolbox. Then, to verify the rationality of the model structure of the robotic arm, the forward and reverse kinematics analysis is carried out, and the reachable space is analyzed by the Monte Carlo method. Finally, the gripping trajectory simulation of the collaborative robotic arm is carried out. The simulation results show that the operation trajectory after the transition processing of the 5-3-5 joint interpolation method can make the operation of the collaborative manipulator more stable.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lide Zhao, Qian Xiao, Hao Chen, and Qian Li "Research on trajectory planning method of the collaborative manipulator", Proc. SPIE 12748, 5th International Conference on Information Science, Electrical, and Automation Engineering (ISEAE 2023), 127484M (10 August 2023); https://doi.org/10.1117/12.2689399
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Robotics

Interpolation

Monte Carlo methods

Kinematics

Angular velocity

Matrices

MATLAB

Back to Top