Presentation + Paper
12 March 2024 Dynamic focus control in a coherent lidar using a fast MEMS mirror
Author Affiliations +
Proceedings Volume 12899, MOEMS and Miniaturized Systems XXIII; 128990C (2024) https://doi.org/10.1117/12.3000543
Event: SPIE OPTO, 2024, San Francisco, California, United States
Abstract
This paper demonstrates the use of a variable focus MEMS mirror in a frequency-modulated continuous-wave (FMCW) lidar system. The mirror can reveal short range targets that are typically hidden because the lidar was out of focus, and has demonstrated the ability to increase the signal level by over 20 dB for close-range targets. We have also demonstrated the ability to dynamically change the focus of the lidar during each sweep of the galvonometer, thus allowing the resolution of targets at different ranges during each sweep. The electrostatically driven 4 mm diameter mirror has a transition time of less than 1 ms and a focal length that can range from infinity to 56 mm which corresponds to wavefront Zernike fringe defocus coefficient ranging from 0 to 18 μm.
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Andrew D. Oliver, Stevens L. Shea, Michael R. Roddewig, Joseph A. Shaw, and David L. Dickensheets "Dynamic focus control in a coherent lidar using a fast MEMS mirror", Proc. SPIE 12899, MOEMS and Miniaturized Systems XXIII, 128990C (12 March 2024); https://doi.org/10.1117/12.3000543
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

LIDAR

Signal detection

Microelectromechanical systems

Point clouds

Target detection

RELATED CONTENT


Back to Top