Paper
2 November 2023 Design of initial configuration method of peripheral chip based on DSP+FPGA board
Lei Wang, Pingni Liu, Baoxiang Ren, Wei Zhou, Dongwei Zhang, Jinfu Lin
Author Affiliations +
Proceedings Volume 12919, International Conference on Electronic Materials and Information Engineering (EMIE 2023); 129191G (2023) https://doi.org/10.1117/12.3011231
Event: 3rd International Conference on Electronic Materials and Information Engineering (EMIE 2023), 2023, Guangzhou,, China
Abstract
This research is devoted to communication circuit, based on DSP module and FPGA module board card. The chip to be configured is physically connected to initialize peripheral devices. According to SPI sequential logic, register configuration is realized, chip initialization is completed, and chip initialization device can work reliably in digital communication system. The debugging tool can realize real-time control, debugging and optimization of chip function performance. On-line check and monitor the real-time status of the register, analyze the chip configuration status. The chip configuration status and hardware signal baseband board can be remotely detected and configured. It is widely used in a variety of complex environments.
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Lei Wang, Pingni Liu, Baoxiang Ren, Wei Zhou, Dongwei Zhang, and Jinfu Lin "Design of initial configuration method of peripheral chip based on DSP+FPGA board", Proc. SPIE 12919, International Conference on Electronic Materials and Information Engineering (EMIE 2023), 129191G (2 November 2023); https://doi.org/10.1117/12.3011231
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital signal processing

Field programmable gate arrays

Logic

Design and modelling

Clocks

Data transmission

Telecommunications

Back to Top