Paper
6 November 2023 High sensitivity distributed lateral pressure sensor based on BOTDR
Ying Wang, Zongda Zhu, Xiaomeng Xia, Tong Chen, Yue Deng, Can Li, Fuwen Bai, Wei Jin, Xiaohui Tang
Author Affiliations +
Proceedings Volume 12921, Third International Computing Imaging Conference (CITA 2023); 129213C (2023) https://doi.org/10.1117/12.2691555
Event: Third International Computing Imaging Conference (CITA 2023), 2023, Sydney, Australia
Abstract
In this work, a high-sensitivity distributed lateral pressure sensor based on Brillouin Optical Time-Domain Reflectometry (BOTDR) technique is proposed to enhance the pressure sensitivity using a double-coated Single-Mode Fiber (SMF). Firstly, a pressure-induced strain model is developed to analyze the enhancement mechanism of pressure sensitivity by Brillouin Frequency Shift (BFS). With increasing of outer coating radius, or with decreasing of the Young’s modulus and Poisson’s ratio of outer coating, the lateral pressure sensitivity increases. By using a double-coated SMF whose outer coating radius is 1500 μm, a high sensitivity of -3.51 MHz/MPa in the range of 0-30 MPa is achieved, which is about five times higher than that of single-coated SMF. At a spatial resolution of 1.5 m, the maximum measurement error of the proposed pressure sensing system is less than 0.09 MPa.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Wang, Zongda Zhu, Xiaomeng Xia, Tong Chen, Yue Deng, Can Li, Fuwen Bai, Wei Jin, and Xiaohui Tang "High sensitivity distributed lateral pressure sensor based on BOTDR", Proc. SPIE 12921, Third International Computing Imaging Conference (CITA 2023), 129213C (6 November 2023); https://doi.org/10.1117/12.2691555
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Single mode fibers

Sensors

Sensing systems

Optical fibers

Polymers

Spatial resolution

Back to Top