Presentation + Paper
9 May 2024 Shape memory alloy and electrostatic brake hybrid actuator system for energy-efficient actuation strategies
Vignesh Venkatachalam, Joshua Mayer, Daniel Bruch, Sophie Nalbach, Gianluca Rizzello, Paul Motzki
Author Affiliations +
Abstract
This work presents a novel actuator system consisting of a combination of shape memory alloy (SMA) wires with electrostatic clutches. The proposed combination of smart material systems stems from the need to reduce the energy consumption of SMA based actuators while leveraging their high energy densities in compact actuation systems. To this end, large actuation forces provided by SMA wires are combined with the highly energy-efficient actuation of electrostatic clutches. The actuation of the SMA wire generates the desired motion after which the activation of the clutch and deactivation of the SMA wire ensures that the desired position is held in an energyefficient manner. A retractable electro-adhesive tubular clutch was chosen for our testing due to its enclosed nature and ease of fabrication. A characterization setup is also developed and used to demonstrate the feasibility of our new actuator concept. The tests show that a 254 μm SMA wire has an energy consumption rate of about 850.7 mJs−1 as compared to less than 31.3 mJs−1 for the clutch, which results in an energy savings rate of over 800 mJs−1 for position holding tasks.
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Vignesh Venkatachalam, Joshua Mayer, Daniel Bruch, Sophie Nalbach, Gianluca Rizzello, and Paul Motzki "Shape memory alloy and electrostatic brake hybrid actuator system for energy-efficient actuation strategies", Proc. SPIE 12946, Active and Passive Smart Structures and Integrated Systems XVIII, 129461T (9 May 2024); https://doi.org/10.1117/12.3010464
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Shape memory alloys

Actuators

Power consumption

Design

Smart materials

Robotic systems

Robots

Back to Top