Paper
4 April 1979 Plated Copper Substrates For The Los Alamos Scientific Laboratory (LASL) Antares CO2 Laser System
David J. Blevins, James L. Munroe
Author Affiliations +
Proceedings Volume 0171, Optical Components: Manufacture and Evaluation; (1979) https://doi.org/10.1117/12.957054
Event: Los Angeles Technical Symposium, 1979, Los Angeles, United States
Abstract
Antares is a large carbon-dioxide laser system presently under construction at the Los Alamos Scientific Laboratory (LASL). Antares will be part of the LASL High Energy Gas La-ser Facility (HEGLF). Its purpose will be to investigate inertial confinement fusion with light of 10.6-μm wavelength: Most of the optics comprising Antares will be reflectors and, for many reasons, copper is the material of choice. The mirrors range in size from 2.5 cm in diameter to 45 cm in diameter. The copper must be very pure to help maximize damage threshold, making plated copper an attractive solution. The final mirror should be very stable, i.e., characterized by very low microcreep. This makes an alloy a more suitable substrate candidate than pure copper. For Antares, all of the smaller mirrors will be made of copper plated onto an aluminum-bronze substrate, and all of the larger mirrors will be made of copper plated on-to aluminum alloy 2124. This paper discusses how this design was arrived at and the methods used to assure a satisfactory mirror.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David J. Blevins and James L. Munroe "Plated Copper Substrates For The Los Alamos Scientific Laboratory (LASL) Antares CO2 Laser System", Proc. SPIE 0171, Optical Components: Manufacture and Evaluation, (4 April 1979); https://doi.org/10.1117/12.957054
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Copper

Mirrors

Aluminum

Plating

Inspection

Optics manufacturing

Heat treatments

RELATED CONTENT

Efficient manufacturing technology of metal optics
Proceedings of SPIE (October 15 2015)
Design fundamentals of electroformed components
Proceedings of SPIE (September 16 1993)
Light-Weight Replicated Optics
Proceedings of SPIE (November 14 1977)
Diamond Turning Optical Surfaces On Electroless Nickel
Proceedings of SPIE (October 27 1978)
An Optical Evaluation Laboratory For Laser Fusion
Proceedings of SPIE (April 04 1979)

Back to Top