Paper
2 February 1993 Real-time computed tomography of composites during destructive testing
Elan Scheinman, Fredrick L. Roder
Author Affiliations +
Abstract
The feasibility of utilizing real-time computed tomography (CT) to characterize and monitor the growth of defects in composite materials as they undergo destructive testing was investigated. The equipment consisted of an Imatron C-100 Ultrafast CT Scanner, a modified high-temperature laboratory oven, and a motor driven hydraulic ram. Three types of composites were studied: carbon-carbon, carbon-phenolic, and glass-phenolic. Time-density profiles were obtained for each type. In general, the density of the samples decreased slightly upon impact of the ram, then sharply increased before dropping back to a slightly lower constant value.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Elan Scheinman and Fredrick L. Roder "Real-time computed tomography of composites during destructive testing", Proc. SPIE 1737, Neutrons, X Rays, and Gamma Rays: Imaging Detectors, Material Characterization Techniques, and Applications, (2 February 1993); https://doi.org/10.1117/12.138677
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-ray computed tomography

Scanners

Composites

X-rays

Electron beams

Temperature metrology

Computed tomography

Back to Top