Paper
10 December 1992 Roughness evolution of optical materials induced by ion-beam milling
Charles M. Egert
Author Affiliations +
Abstract
Ion beam milling is an emerging advanced optical fabrication technology capable of deterministic figuring of optical surfaces. Much of the work in ion milling to data has emphasized figuring of glass-like materials, such as fused silica, which do not significantly roughen during ion milling. However, for ion milling to reach its full potential as an advanced optical fabrication technique it must be applicable to a broad range of materials to interest in optical fabrication including polycrystalline metals, semiconductors, and ceramics. In order to assess the feasibility of ion milling, the effect of ion dose on roughness evolution was investigated for a variety of materials including: silicon, germanium, sapphire, silicon carbide, fused silica, aluminum, and copper. Single crystal silicon, germanium and sapphire as well as polycrystalline CVD silicon carbide did not significantly roughen during ion milling. The roughness evolution of aluminum, copper and gold thin films were also studied; fine grained gold films were found to remain smooth during ion milling.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Charles M. Egert "Roughness evolution of optical materials induced by ion-beam milling", Proc. SPIE 1752, Current Developments in Optical Design and Optical Engineering II, (10 December 1992); https://doi.org/10.1117/12.130720
Lens.org Logo
CITATIONS
Cited by 20 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ions

Silicon carbide

Polishing

Aluminum

Silica

Copper

Surface finishing

RELATED CONTENT

Cryogenic performance of a passive lightweight mirror
Proceedings of SPIE (August 28 1998)
Progress in ion figuring large optics
Proceedings of SPIE (July 14 1995)
The role of defects in the laser desorption of ions...
Proceedings of SPIE (April 25 2007)
Ion beam figuring system in NUDT
Proceedings of SPIE (November 14 2007)

Back to Top