Paper
19 January 1993 Technique for precision optical timing measurements
Kent L. Anderson
Author Affiliations +
Abstract
High-accuracy absolute timing of optical pulses is usually performed by PMTs, in conjunction with advanced discriminator and time-measurement electronics. This paper presents a new technique that is capable of less than 1.0 psec absolute timing measurements, using Si APDs, with significantly relaxed requirements for the discriminator and timing electronics. An EO modulator is used to modulate the polarization of the optical pulse at a microwave frequency (e.g., 8 GHz), and the two resulting polarization components are detected by the APDs. Relative signal levels at the two polarizations provide a vernier timing measurement with respect to the phase of the microwave modulating signal, and the time ambiguity is resolved by a relatively coarse timing measurement of the detected signals. This technique offers the potential for simpler, lower-cost implementations than PMT and/or streak camera systems, and it is applicable to a wider range of wavelengths, particularly near-IR systems. This paper discusses the general principles and design issues of the technique, and describes a particular design implementation applicable to 2-color lidar ranging.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kent L. Anderson "Technique for precision optical timing measurements", Proc. SPIE 1757, Ultrahigh- and High-Speed Photography, Videography, and Photonics, (19 January 1993); https://doi.org/10.1117/12.139121
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation

Microwave radiation

Signal detection

Polarization

Crystals

Ranging

Avalanche photodetectors

Back to Top