Paper
5 January 1993 "Baffling" design of a three-mirror off-axis celestial telescope
Author Affiliations +
Abstract
Design approches to a space-based celestial telescope, called the Advanced Visible Telescope developed at the University of Arizona Optical Sciences Center, are reviewed with particular attention given to stray light reduction. The major design considerations intended to provide a stiff mounting structure for the optics and adjustments that simplify system alignment, and the introduction of baffles to provide stray-light rejection for off-axis sources are discussed. Two stray light rejection modeling methods are compared which were developed under SOAR (a program for rapid calculation of stray light on the IBM PC) and APART (a first order deterministic stray radiation analysis program). It is concluded that below the critical shading angle both programs show similar results but above critical shading angles there were discrepancies in results.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eric R. Hansen and William L. Wolfe ""Baffling" design of a three-mirror off-axis celestial telescope", Proc. SPIE 1762, Infrared Technology XVIII, (5 January 1993); https://doi.org/10.1117/12.138957
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bidirectional reflectance transmission function

Mirrors

Space telescopes

Telescopes

Stray light

Optical instrument design

Ray tracing

RELATED CONTENT

Stray light design and analysis of the Sounding of the...
Proceedings of SPIE (November 18 1998)
Stray-light analysis of the SABER telescope
Proceedings of SPIE (September 29 1995)
Stray light analysis of the 2.5 meter telescope for the...
Proceedings of SPIE (February 12 1993)

Back to Top