Paper
17 September 1993 Plate optics prepared for making two-step Lippmann holograms
Masane Suzuki, Nobuyoshi Kataoka, Yutaka Munakata
Author Affiliations +
Proceedings Volume 1914, Practical Holography VII: Imaging and Materials; (1993) https://doi.org/10.1117/12.155029
Event: IS&T/SPIE's Symposium on Electronic Imaging: Science and Technology, 1993, San Jose, CA, United States
Abstract
In most laser optical systems, beams are commonly transmitted via optical elements which are put on a table. The drawback of this is that a complicated optical system cannot be formed easily because optical elements on tables are likely to interfere with their own optical paths. It is difficult to arrange an optical system without restriction. We tried to transmit laser beams in a grooved table and got good results with a Fresnel hologram recording system. But we couldn't study the downsizing potential as the merit of plate optics thoroughly because this system was sized 20 inches square. In the field of optoelectronics downsizing of devices will be demanded. We then made a 10 inches square sized plate optics and formed a two step Lippmann hologram recording system which is more advanced then the Fresnel type.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masane Suzuki, Nobuyoshi Kataoka, and Yutaka Munakata "Plate optics prepared for making two-step Lippmann holograms", Proc. SPIE 1914, Practical Holography VII: Imaging and Materials, (17 September 1993); https://doi.org/10.1117/12.155029
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Holograms

3D image reconstruction

Mirrors

Optical components

Wave plates

Diffraction

Beam splitters

Back to Top