Paper
15 November 1993 Improvement of image quality of framing streak tube with FOP output window
Kuniyoshi Mori, Kenji Suzuki, Koichiro Oba
Author Affiliations +
Abstract
Bright and dark spots noise phenomena observed on the phosphor screen output of framing streak tube with Fiber Optic Plate (FOP) output window have been investigated and the mechanism of these phenomena has been attributed to undesirable accumulation of charge on the FOP because of nonuniformity of FOP resistance. In order to solve these noise problems, the transparent conductive layer (ITO) was inserted between the FOP and phosphor screen. It was shown that bright and dark spot noises were completely eliminated by this method. In addition to this improvement, the conversion gain of the phosphor was also shown to be improved. The improvement of conversion gain and spatial resolution were about 1.5 approximately 2.0 times compared to conventional values. This method could be effectively applied to all kinds of imaging devices with FOP in which the high quality of the image intensification is most important.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kuniyoshi Mori, Kenji Suzuki, and Koichiro Oba "Improvement of image quality of framing streak tube with FOP output window", Proc. SPIE 1952, Surveillance Technologies and Imaging Components, (15 November 1993); https://doi.org/10.1117/12.161407
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image quality

Resistance

Microchannel plates

Spatial resolution

Electrodes

Fiber optics

Imaging devices

Back to Top