Paper
17 December 1993 On-line surface inspection for continuous cast aluminum strip
Carlos Fernandez, Pascual Campoy, Carlos Platero, Jose M. Sebastian, Rafael Aracil
Author Affiliations +
Proceedings Volume 1989, Computer Vision for Industry; (1993) https://doi.org/10.1117/12.164877
Event: Electronic Imaging Device Engineering, 1993, Munich, Germany
Abstract
A general architecture for detecting and analyzing surface defects in aluminum strip is described. Information concerning visual information from the aluminum surface, surface temperature and strip dimensions--profile thickness-is processed jointly by means of an expert system in order to determine the quality level of each aluminum coil produced; control actions over the casting process, derived from this information, are also suggested by an expert system. This paper shows in deep work related to surface image analysis. The data volume to be processed, up to 20 Mbytes/s, has forced up the development of a high parallel architecture for high-speed image processing. A specially suitable lighting system has been developed for enhancing matrical image acquisition from metallic surfaces that includes reflect avoidance as well as uniform incident angle of light along the scanned portion of surface--about 120000 square mm.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Carlos Fernandez, Pascual Campoy, Carlos Platero, Jose M. Sebastian, and Rafael Aracil "On-line surface inspection for continuous cast aluminum strip", Proc. SPIE 1989, Computer Vision for Industry, (17 December 1993); https://doi.org/10.1117/12.164877
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aluminum

Inspection

Image processing

Defect detection

Image segmentation

Machine vision

Computer vision technology

RELATED CONTENT

Job-shop scheduling applied to computer vision
Proceedings of SPIE (September 19 1997)
Real-Time Automatic Inspection Of Web Materials
Proceedings of SPIE (December 19 1985)
Texture defects and visual inspection
Proceedings of SPIE (April 06 1987)
Wire-bond inspection in IC assembly
Proceedings of SPIE (February 21 1996)
Finish inspection by vision for glass production
Proceedings of SPIE (March 11 1994)

Back to Top