Paper
1 May 1994 Detection of acoustic emission location using optical fiber sensors
Kent A. Murphy, Michael F. Gunther, Anbo Wang, Richard O. Claus, Jonathan A. Greene, Tuan A. Tran
Author Affiliations +
Abstract
This paper describes a fiber optic system for detection of acoustic emission location in which extrinsic Fabry-Perot interferometric fiber sensors are incorporated in two different configurations: (1) attached to a thin aluminum panel, and (2) embedded in a graphite/epoxy composite laminate. The system computes the coordinate of the acoustic emission source using sensor recorded differential arrival times of the acoustic signals generated by the source. The impact location can be determined with a 0.5 millimeter resolution and an accuracy typically less than five millimeters.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kent A. Murphy, Michael F. Gunther, Anbo Wang, Richard O. Claus, Jonathan A. Greene, and Tuan A. Tran "Detection of acoustic emission location using optical fiber sensors", Proc. SPIE 2191, Smart Structures and Materials 1994: Smart Sensing, Processing, and Instrumentation, (1 May 1994); https://doi.org/10.1117/12.173957
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Acoustics

Composites

Fiber optics sensors

Acoustic emission

Aluminum

Interferometers

Back to Top