In-line fiber etalon (ILFE) for internal strain measurement

James S. Sirkis; Martin A. Putnam; Timothy A. Berkoff; Alan D. Kersey; E. Joseph Friebele; Richard T. Jones; Denise Brennan

doi:10.1117/12.173940

1 May 1994 In-line fiber etalon (ILFE) for internal strain measurement

James S. Sirkis, Martin A. Putnam, Timothy A. Berkoff, Alan D. Kersey, E. Joseph Friebele, Richard T. Jones, Denise Brennan

Author Affiliations +

Proceedings Volume 2191, Smart Structures and Materials 1994: Smart Sensing, Processing, and Instrumentation; (1994) https://doi.org/10.1117/12.173940
Event: 1994 North American Conference on Smart Structures and Materials, 1994, Orlando, FL, United States

Abstract

This paper describes an optical fiber interferometer that uses a short segment of silica hollow- core fiber spliced between two sections of single-mode fiber to form a mechanically robust in- line optical cavity. The hollow-core fiber is specifically manufactured to have an outer diameter that is equal to the outer diameter of the single mode lead fibers, thereby combining the best qualities of existing intrinsic and extrinsic Fabry-Perot sensors. Uniaxial tension and pure bending strength tests are used to show that the new configuration does not diminish the axial strength of bare fiber and reduces the bending strength by 17% at most. Similar tests confirm that the fiber sensor has 1.96% strain to failure. Axisymmetric finite element analysis is used to investigate the reliability of the in-line etalon during typical thermoset composite cure conditions, and parametric studies are performed to determine the mechanically optimal cavity length. The sensor strain response tests demonstrate a dynamic strain resolution of 21 n(epsilon) /(root)Hz at frequencies > 5 Hz with a sensor gauge length of 137 micrometers .

Citation Download Citation

James S. Sirkis, Martin A. Putnam, Timothy A. Berkoff, Alan D. Kersey, E. Joseph Friebele, Richard T. Jones, and Denise Brennan "In-line fiber etalon (ILFE) for internal strain measurement", Proc. SPIE 2191, Smart Structures and Materials 1994: Smart Sensing, Processing, and Instrumentation, (1 May 1994); https://doi.org/10.1117/12.173940

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE