Paper
10 February 1995 LASAIR: New remote sensing instruments based on near-infrared diode lasers
Harold I. Schiff, Shachar D. Nadler, Gervase I. Mackay
Author Affiliations +
Proceedings Volume 2366, Optical Instrumentation for Gas Emissions Monitoring and Atmospheric Measurements; (1995) https://doi.org/10.1117/12.205590
Event: Optical Sensing for Environmental and Process Monitoring, 1994, McLean, VA, United States
Abstract
Three versions of a near infrared system based on commercial communication type laser diodes have been developed. They have high selectivity and good sensitivity for a number of important gases. All three systems use a common control and data logging and analysis box. The LASAIR-R is a simple, inexpensive, remote sensing instrument using a single 10 cm Cassegrain telescope to both transmit and receive the laser beam. The LASAIR-S is a system for continuous, non-extractive stack monitoring. Fiber optics are used to take the laser beam from the control box (suitably located in the plant), to the stack and to bring the return back to the box. The LASAIR-P is a point source instrument using a multipath cell inside the box to provide the sensitivity required. The ease of operation and the relatively low cost should make these systems an attractive method for measuring specific gases for industrial and regulatory markets.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Harold I. Schiff, Shachar D. Nadler, and Gervase I. Mackay "LASAIR: New remote sensing instruments based on near-infrared diode lasers", Proc. SPIE 2366, Optical Instrumentation for Gas Emissions Monitoring and Atmospheric Measurements, (10 February 1995); https://doi.org/10.1117/12.205590
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Remote sensing

Semiconductor lasers

Gases

Calibration

Fiber optics

Near infrared

Sensors

Back to Top