Paper
16 June 1995 Low-cost infrared detector assembly for use in heterodyne receivers at 10.6 μm
Author Affiliations +
Abstract
A low cost heterodyne receiver assembly has been designed and fabricated for systems such as the U.S. Army's Multiple Launch Rocket System (MLRS). The receiver assembly was fabricated from `commercial off the shelf' (COTS) components, taking advantage of the low cost of volume production for the dewar, detector, and cryogenic cooler. The design and performance of the heterodyne receiver assembly is the subject of the present paper. With minor modifications to the standard `imaging photodiode' process, heterodyne quantum efficiencies of 30% have been demonstrated at 2 GHz. While the performance achieved so far has been encouraging, further improvements in device design and processing technology can serve to enhance the performance. With these changes, we believe that heterodyne quantum efficiencies of 40% with bandwidth exceeding 3 GHz is achievable. These changes are also expected to reduce the cost of fabrication of these photodiodes.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kevin P. Hyde "Low-cost infrared detector assembly for use in heterodyne receivers at 10.6 μm", Proc. SPIE 2472, Applied Laser Radar Technology II, (16 June 1995); https://doi.org/10.1117/12.212021
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Heterodyning

Sensors

Receivers

Capacitance

Photodiodes

Quantum efficiency

Diffusion

RELATED CONTENT


Back to Top