Paper
20 June 1995 Image restoration techniques using Compton backscatter imaging for the detection of buried land mines
Joseph C. Wehlburg, Shyam P. Keshavmurthy, Yoichi Watanabe, Edward T. Dugan, Alan M. Jacobs
Author Affiliations +
Abstract
Earlier landmine imaging systems used two collimated detectors to image objects. These systems had difficulty in distinguishing between surface features and buried features. Using a combination of collimated and uncollimated detectors in a Compton backscatter imaging (CBI) system, allows the identification of surface and buried features. Images created from the collimated detectors contain information about the surface and the buried features, while the uncollimated detectors respond (approximately 80%) to features on the surface. The analysis of surface features are performed first, then these features can be removed and the buried features can be identified. Separation of the surface and buried features permits the use of a globbing algorithm to define regions of interest that can then be quantified [area, Y dimension, X dimension, and center location (xo, yo)]. Mine composition analysis is also possible because of the properties of the four detector system. Distinguishing between a pothole and a mine, that was previously very difficult, can now be easily accomplished.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joseph C. Wehlburg, Shyam P. Keshavmurthy, Yoichi Watanabe, Edward T. Dugan, and Alan M. Jacobs "Image restoration techniques using Compton backscatter imaging for the detection of buried land mines", Proc. SPIE 2496, Detection Technologies for Mines and Minelike Targets, (20 June 1995); https://doi.org/10.1117/12.211329
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Collimation

Land mines

Mining

Detection and tracking algorithms

Image sensors

Data acquisition

Back to Top