Paper
20 June 1995 Modeling of the separated-aperture mine detection sensor using the transmission line matrix (TLM) technique
Kelly D. Sherbondy, Charles A. Amazeen
Author Affiliations +
Abstract
A numerical time-domain technique known as the transmission line matrix (TLM) method was used to analyze a ground penetrating radar (GPR) concept historically known as the separated aperture technique. This GPR concept is basically a dielectric anomaly (mine) detection sensor which operates near the L band frequency. This mine sensor consists of transmit and receive broadband dipole antenna. Each antenna is contained within a metallic cavity and the cavities are connected by a metallic septum. Normally, when the mine sensor is scanned over homogeneous earth, very little transmitted power is received by the receiving antenna. The power received by the receiving antenna however, is significantly increased when the detector is scanned over a buried dielectric anomaly (mine). This technique has performed in terms of probability of detection and false-alarm rates at different sites with different mine types. The TLM method was used to analyze the separated aperture mine detector's response to targets, clutter, and to provide insight into the fundamental wave interactions.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kelly D. Sherbondy and Charles A. Amazeen "Modeling of the separated-aperture mine detection sensor using the transmission line matrix (TLM) technique", Proc. SPIE 2496, Detection Technologies for Mines and Minelike Targets, (20 June 1995); https://doi.org/10.1117/12.211387
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mining

Sensors

Antennas

Land mines

Dielectrics

General packet radio service

Electromagnetism

Back to Top