Paper
13 October 1995 Noise temperature and IF bandwidth of a 530-GHz heterodyne receiver employing a diffusion-cooled superconducting hot-electron mixer
Anders J. Skalare, William R. McGrath, Bruce Bumble, Henry G. LeDuc, P. J. Burke, A. A. Verheijen, Daniel E. Prober
Author Affiliations +
Abstract
We report on the first heterodyne measurements with a diffusion-cooled hot-electron bolometer mixer in the submillimeter wave band, using a waveguide mixer cooled to 2.2 K. The best receiver noise temperature at a local oscillator frequency of 533 GHz and an intermediate frequency of 1.4 GHz was 650 K (double sideband). The 3 dB IF roll-off frequency was around 1.7 to 1.9 GHz, with a weak dependence on the device bias conditions.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anders J. Skalare, William R. McGrath, Bruce Bumble, Henry G. LeDuc, P. J. Burke, A. A. Verheijen, and Daniel E. Prober "Noise temperature and IF bandwidth of a 530-GHz heterodyne receiver employing a diffusion-cooled superconducting hot-electron mixer", Proc. SPIE 2558, Millimeter and Submillimeter Waves II, (13 October 1995); https://doi.org/10.1117/12.224230
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Receivers

Bolometers

Heterodyning

Superconductors

Temperature metrology

Aerospace engineering

Extremely high frequency

RELATED CONTENT

Sis-mixers around the gap frequency
Proceedings of SPIE (January 01 1994)
A sub millimetre wave SIS receiver for the James Clerk...
Proceedings of SPIE (November 30 2017)
A sub-millimetre wave SIS receiver
Proceedings of SPIE (August 30 1993)
SIS-mixer development at SRON
Proceedings of SPIE (August 30 1993)

Back to Top