Heat generation of a piezoceramic induced-strain actuator embedded in a glass/epoxy composite panel

George Andre Lesieutre; Lei Fang; Gary H. Koopmann; Suresh P. Pai; Shoko Yoshikawa

doi:10.1117/12.239030

1 May 1996 Heat generation of a piezoceramic induced-strain actuator embedded in a glass/epoxy composite panel

George Andre Lesieutre, Lei Fang, Gary H. Koopmann, Suresh P. Pai, Shoko Yoshikawa

Proceedings Volume 2717, Smart Structures and Materials 1996: Smart Structures and Integrated Systems; (1996) https://doi.org/10.1117/12.239030
Event: 1996 Symposium on Smart Structures and Materials, 1996, San Diego, CA, United States

Abstract

The thermal response of a specific piezoceramic induced-strain actuator (the Penn State SPICES 'frame' actuator) was investigated under two conditions: (1) as a free device; and (2) embedded in a woven glass/epoxy composite panel. Actuators were driven at various combinations of electric field strengths and frequencies. Field strengths ranged from 75 kV/m to 1.5 MV/m (10 to 200 Vrms over a 135 micron thickness), while frequencies ranged from 100 Hz to 2000 Hz. The 50-ply composite panel was instrumented with thermocouples at 4 locations through the panel thickness. Temperature measurements were recorded continuously from an initial ambient isothermal state until a steady state temperature distribution was reached. Temperatures increased with frequency and field level, with heat generation roughly proportional to the frequency and to the square of the field level, consistent with a dielectric loss mechanism. The temperature rise at the actuator-composite interface, when driven at 100 Vrms and 500 Hz, was 50 degrees Celsius. The data indicate that self-heating in applications involving a combination of high field levels, high frequencies, and thick composites can result in high internal temperatures, and possibly lead to reduced performance and reliability.

Citation Download Citation

George Andre Lesieutre, Lei Fang, Gary H. Koopmann, Suresh P. Pai, and Shoko Yoshikawa "Heat generation of a piezoceramic induced-strain actuator embedded in a glass/epoxy composite panel", Proc. SPIE 2717, Smart Structures and Materials 1996: Smart Structures and Integrated Systems, (1 May 1996); https://doi.org/10.1117/12.239030

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available